Orchid Vapor x Squid Industries Orchid Pod System
Orchid Vapor with the collaboration of Squid Industries presents an amazing new vape device, the Orchid. This pod system stands out among the rest due to the implementation of an OLED screen and the ability to use either variable wattage, variable voltage, and temperature control. In addition the pod selection for this device, one being mesh and the other stainless steel, is an amazing option when choosing which type of e-liquid to use.
The Orchid is surprisingly light due to the zinc alloy construction; with all the weight on the center of the device, carrying this all day won't be a problem. Each plate features a "designer" pattern and adds an extra flare to the device. Located on the sides are the unique features for a pod system; The oversized firing button, dual adjustment buttons, and a 0.69 inch OLED screen. This OLED screen shows users essential vaping data like the wattage output, working mode, batterylife, and more. Unlike pod devices users can cycle through wattage output much like regular vape devices. Clicking the firing button three times allows users to choose between variable wattage (VW), variable voltage (VV), and finally stainless steel (the Temp Control). Powering the Orchid is a whopping 950mAh integrated battery, this battery can be easily charged through the USB port with up to 1A charge.
Atop the Orchid is its own proprietary pod system. This pod system clicks into place and is not connected by magnets. This pods connect to the device through the teeths located on the base of the pod, snapping perfectly in place onto the device. Juice enters this pod by unthreading the knurled cap and filling it up with up to 3ml of either salt based nicotine or freebase e-liquid. Located adjacent to the cap is a 5mm bore drip tip with the airflow control right below it. This airflow slot measures at 4mm by 1mm and can be easily adjusted due to the knurled design. Internally the Orchid Pod utilizes either a SS316 coil or a mesh coil. The SS316 pod has an atomizer resistance of 1.3 ohm whilst the Mesh coil has a resistance of 0.8 ohm. Each pods provide exceptional flavor and cloud production and can be manipulated with the devices' variable working modes.
All in all the Orchid by Orchid Vapor and Squid Industries is a must have for those looking into Pod Systems that feels like a miniature vape mod.
- 5 to 30W
- 3.0 to 4.8 Output Voltage
- Temperature Control Support
- Stainless Steel
- 200 to 500° Degrees Fahrenheit
- Built-in 950mAh Battery
- Orchid Replacement Pod
- 0.69 Inch OLED Screen
- Output Wattage
- Output Temperature
- Output Voltage
- Battery Life Indicator
- Atomizer Resistance
- Work Mode
- Puff Counter
- Three Button Control Face
- Large Firing Button
- Adjustment Buttons
- Micro USB Port
- 1A Charging
- Zinc Alloy Chassis Construction
- 86.1mm by 37.0mm by 15.7mm
- 3ml E-Liquid Capacity
- Orchid Pod Family
- 0.8 ohm Mesh Coil
- 1.3 ohm SS316 Coil
- Locking Tabs
- Airflow Located on Drip Tip
- 4mm by 1mm
- Knurled Design
- Threaded Cap Fill Port
- Click-in-Place System
- 5mm Bore Proprietary Drip Tip
- Compatible with Salt Nic E-Liquid or Regular Nicotine E-Liquid
- One Squid Industries Orchid Pod System
- One 0.8 ohm Mesh Pod
- User Manual and Warranty Card
- Micro USB Cable
Check out the Orchid Vapor infographic to help you better understand how the product works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.