popular categories
NEW ARRIVALS
View all
Vandy Vape x Tony B Pulse Dual 220W Squonk Box Mod and Starter Kit
Vandy Vape x Tony B Pulse Dual 220W Squonk Box Mod and Starter Kit
The Vandy Vape Pulse Dual box mod is powered by the Vandy Chip which is capable of variable wattage, temperature control, voltage output, and bypass mode. The variable wattage mode has a 5 to 200W output, 0.05 to 3 ohm atomizer resistance range, and 0.5 to 8.4V voltage output. Temperature control mode has a range of 200 to 600 degrees Fahrenheit, 0.05 to 1.5 ohm resistance range, and supports the use of nickel, titanium, and 316 stainless steel. This box mod features a sharp 0.98 inch black and white screen that displays output temperature, output wattage, output voltage, atomizer resistance, and dual battery life indicator. An independent bottle chamber has been added in order to store the 7ml knurled top cap bottle separately from the battery chamber. The Pulse Dual has a three button control face with two adjustment buttons below the screen and an over-sized firing button above the removable colored PEI face plate. The battery is secured with a bottom sliding latch battery door that holds two high amperage 18650 batteries. The device has a micro USB port that supports 1.8A charging and software updates. The 510 contact point is stainless steel plated and has a gold plated squonk pin. The Vandy Chip provides overtime protection, atomizer checking, low power warnings, atomizer short warning, atomizer resistance warning, and overheat protection.
The Vandy Vape Pulse V2 included with this starter kit is a 24mm diameter deck with a 32.4mm top cap. The build deck features a floating dual post, four terminal build deck with the squonk port built into the post. Each terminal has a side mounted hex screw and is 3mm by 2mm wide and is slanted in a "Y" formation. The 5mm deep juice well has two overfill ports that drains excess e liquid from the RDA. Maintaining the design of the original Pulse, the top cap is separated into an upper and lower segment. The lower segment has a notched locking barrel design, while the top cap has two 7.5mm by 4mm air slots and can be rotated to adjust airflow. This version of the Pulse has interchangeable internal PEI rings that vary in build style compatibility and overall airflow. Single coil builds pair well with the single coil honeycomb air ring that has eight 1.5mm air holes per side and has a 6mm long slanted jet funnel that pulls air directly to the coil. The dual coil honeycomb ring has the same 8 1.5mm air holes per side but a shorter 3mm long slanted jet funnels, which allows for dual coil builds. For maximum airflow, the dual coil slanted jet funnel has two 8mm by 3mm air slots. The Pulse V2 RDA has a gold plated contact and 510 bottom feed pin and a 12.5mm bore 810 wide acrylic drip tip. This high powered combination provides for amazing performance and battery life, all the while maintaining a smaller-than-most form factor.
RiP Trippers Reviews the Vandy Vape x Tony B Pulse Dual 220W Squonk Box Mod
Mod Specifications
- Powered By The Vandy Chip
- 5 to 220W Output Range
- 0.05 to 3 ohm VW Resistance Range
- 0.5 to 8.4 Voltage Output Range
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- 200 to 600 degree Fahrenheit Range
- User Defined Temperature Controlled Mode
- User Defined TC Curve Set
- 0.05 to 1.5 ohm TC Resistance Range
- Output Modes
- Power Mode Output
- Bypass Mode Output
- Voltage Output mode
- .98" OLED Screen
- Vertical Arrangement
- Output Temperature
- Output Wattage
- Output Voltage
- Material and Mode Selection
- Atomizer Resistance
- Dual Battery Life Indicator
- 7ml Squonk Bottle
- Independent E-Liquid Chamber
- Removable PEI Face Plate
- Knurled Top Cap
- Three Button Control Face
- Oversized Firing Button Above Squonk Bottle
- Two Adjustment Buttons
- Lock with "+" and Firing Button for Two Seconds
- Flip Screen Orientation with "-" and Firing Button for Two Seconds
- Bottom Sliding Latch Battery Door
- Accepts Two High Amperage 18650 Batteries
- Batteries Sold Separately
- USB Port
- 1.8A Charging
- Update and Charging
- Accepts Two High Amperage 18650 Batteries
- Stainless Steel Plated 510 Threading
- Spring Loaded Gold Plated Center Pin
- Gold Plated Contact Points
- Device Safety Features
- Overtime Protection/Atomizer Checking/Low Power/Short Atomizer/High or Low Resistance Warning/Overheat Protection
Product Dimensions:
- 75.3mm by 52.9mm by 41.7mm
Atomizer Specifications
-
24mm Diameter
- 32.4mm Top Cap Height
- Floating Dual Post, Four Terminal Build Deck
- 3mm by 2mm Each Terminal
- 5mm Deep Juice Well
- Side Mounted Hex Screws
- Top Squonk Feeding
- E Juice Overfill Return Port
- Interchangeable PEI Internal Airflow Rings
- Single Coil Honeycomb Design
- Eight 1.5mm Air Holes Per Side
- 6mm Long Slanted Jet Funnel
- Dual Coil Honeycomb Design
- Eight 1.5mm Air Holes Per Side
- 3mm Long Slanted Jet Funnel
- Dual Coil Large Airflow Design
- 8mm by 3mm Air Slot Per Side
- 3mm Long Slanted Jet Funnel
- Single Coil Honeycomb Design
- Dual Segment Airflow Adjustment
- Upper Segment with Dual Airflow Slots
- 7.5mm by 4mm Per Air Slot
- Rotating Upper Top Cap Segment
- Notched Locking Barrel Lower Segment
- Upper Segment with Dual Airflow Slots
- Gold Plated 510 Contact
- Bottom Feed 510 Pin
- 304 Stainless Steel
- 510 Drip Tip Adapter
- 12.5mm Bore Wide 810 Acrylic Drip Tip
Product Includes
Pulse Dual Starter Kit
- One Pulse Dual Box Mod
- One Pulse V2 RDA
- One 7ml Squonk Bottle
- One Micro USB Cable
- One Accessory Bag
- One Spare Parts Bag
- User Manual and Warranty Card
Pulse Dual Mod Only
- One Pulse Dual Box Mod
- One Micro USB Cable
- One 18650 Adapter
- User Manual and Warranty Card
- Disclaimer
- Shipping and Returns
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
Please refer to our Domestic Shipping and International Shipping pages for more detailed information.
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations:
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Customer Reviews
- Reviews
- Questions
- batteries
- bottle
- hand
- juice
- device
- squonk
- fire button
- button
- flavor
- mods
Vandy Vape Pulse Dual Kit
Absolutely the best dual battery squonk mod on the market today at this price point. The Pulse RDA V2 is also very easy to build on and does not leak! I use it in single coil mode with temp control and easily get a whole day of vaping utilizing Hohm Life 18650 batteries. This product is absolutely a winner!!
Dual issue
Kit was great at first, after maybe 2 weeks of use the issue started. I looked at the screen and it read, timed out, and wouldn't do anything. I had to open battery door to turn off, turned mod back on, seemed to work fine but a lil later it just fired on it's own. I thought this is strange and not safe since it stays turned on and sets on my nightstand. I clicked the fire button and it stopped, but it wasn't long and it auto fired again so I had to open battery door again to get it to turn off. I closed battery door and turn mod on again, screen showed new or old coil option to click + or - but wouldn't do anything when I pushed the button. I tried fresh batteries and repeated process but still wouldn't do anything.. I played it off as a load since I can't find receipt ordered it as guest, and decided to take it apart. I discovered to tiny board for the fire button was saturated with e-juice. I took alcohol and q-tips and cleaned board and area from all juice and let dry before reassemble. Crossing my fingers I turned mod on and it worked fine with no issues, but only lasted for 5 days. Mod started auto firing again, grabbed mod a clicked fire button and it stopped. Mod repeatedly auto fired a couple more times until I took batteries out. Guess it's time to disassemble again. Kit is a awesome setup, great vape experience, but needs something done to prevent juice from getting on board and shorting out, I'm just glad it had safety feature on timed out on firing or that could of been bad.
First squonk
Been vaping for years but after looking more and more into sqounks I finally decided on this mod and I love it. I replaced the rda with a wotofo profile rda after seeing all the hype over it and they both work fantastic. Would definitely recommend.
Fantastic kit
Awesome Mod, easy to add juice to the bottle. I like not having to open the battery latch to get the bottle out. It’s also nice opening the battery latch and and the batteries not flying out. Easy and clean interface to adjust settings. The size is perfect and the button is positioned well. The RDA is fantastic. I love the air channel clip in. 2 different options for dual coil and also an option for single. The deck is extremely easy to build on and the juice channels distribute perfectly. Very deep well, have yet to leak yet. Overall my favorite setup yet!
Best squonker ever
I highly recommend this device. I've been using it for a few weeks now, all day, every day. It hits like a truck full of-------bananas
