Hellvape x Mike Vapes Rebirth 25mm RTA
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
Hellvape with yet another amazing collaboration with Mike Vapes presents the Rebirth Rebuildable Tank Atomizer. Similar to its RDA counterpart, the Rebirth RTAs build deck features a dual post single terminal build deck. The honeycomb airflow slots are now found on the build deck whilst the regular airflow slits are on the base of the atomizer. For user customization, an added frosted drip tip and a 510 drip tip adapter is included in the package.
Going more in depth with the Rebirth, this rebuildable tank atomizer measures at 25mm in base diameter, accommodating most, if not a high percentage of vape mods in the market. E-liquid enters the Rebirth through a quarter turn top fill design and can accommodate a maximum of 2ml with the pre-installed straight glass tank section and a higher 5ml capacity with the included bubble glass tank section. Airflow enters the Rebirth through a double adjustable airflow slot located on the base of this atomizer. This airflow slots measures at 11.5mm by 2mm and can be manipulated with the airflow control ring with ease.
Internally, the Rebirth RTA features the same two post single terminal build deck we all know from the RDA version. This single terminal measures at 3mm by 2mm and can accommodate a double coil build configuration. Each corner ends of the build deck features a cutout for cotton to snuggly fit in. Surrounding the build posts are fourteen honey-styled airflow slots (each measuring at 1mm each) and two airflow slots on the base (measuring at 1.5mm each) that directly brings airflow to the coils and delivering amazing flavor on each puff.
All in all the Rebirth RTA by Hellvape x Mike Vapes is an example of a well done conversion of an RDA into an RTA; A must have for builders, cloud chasers, and flavor connaisseurs.
RiP Trippers Reviews the Rebirth RTA!
- 25mm Diameter
- 5ml Tank Capacity
- High Capacity Tank Reservoir
- Quarter Turn Top Fill Design
- Two Large Fill Ports
- Can Hold 2ml with the Regular Glass Tank Section
- Two Post Build Deck
- Dual Coil Design
- Single Terminal
- Side Mounted Flathead Screws
- 3mm by 2mm Each Terminal
- Corner Wicking Cutouts
- PEEK Insulation
- Single Terminal
- Honeycomb Style Internal Airflow Slots
- 1mm Each
- 14 Slots
- Dual Coil Design
- Dual Adjustable Bottom Airslots
- 11.5mm by 2mm Each Airslot
- Fully Closeable
- 10mm Wide Bore Cobra 810 Drip Tip
- 10mm Wide Bore Frosted 810 Drip Tip
- 304 Stainless Steel and Glass Construction
- Gold Plated 510 Contact
- One Hellvape Rebirth RTA
- Spare Glass Tank Section
- One 10mm Bore 810 Frosted Drip Tip
- One 10mm Bore 810 Cobra Drip Tip
- One 510 Drip Tip Adapter
- One Coil Cutting Block
- Spare O-Ring and Screw Pack
- One Flathead Screwdriver
Check out the Rebirth RTA infographic to help you better understanding how the product works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.