SUSCo KE2CH Postless RBA Boro Bridge
VaporDNA Vaper's Choice: Best Dual Coil Boro Bridge
Straight Up Supply Co present the KE2CH RBA Boro Bridge, a post-less rebuildable bridge for boro tanks and devices. The KE2CH Bridge features a 4 terminal post-less build deck, 9 sizes of airflow pin options, and an additional positive post to accommodate the larger airflow pins. The KE2CH Bridge can be configured to be used for MTL, RDL, and even DL styles of vaping, but is recommended for use with larger diameter coils. The KE2CH Bridge is compatible with Boro tanks that accept Boro Bridges.
The build deck of the KE2CH Bridge features a four terminal setup that can fit left hand wrapped coils and right hand wrapped coils, and can accommodate a DUAL COIL build. Each terminal features wide openings to be compatible with most wire formats, and a small flathead grub screws. Perpendicular to the posts are two large wicking channels for positioning your wicks. The base of the KE2CH Bridge is 510 threaded, eliminating the need for an adapter to build and pre-fire your coil.
Pro Tip: Be careful with the small grub screws when tightening them down. Do not over tighten as they can strip. If slipping begins, replace with a new screw included in the parts pack. The 510 threads built into the bottom of the KE2CH are shallow. A mod with a 510 threaded to the top is needed to secure the bridge when building, if pre-firing the coil is required.
Product Includes:
- 1 x KE2CH Bridge
- 1 x Positive post for standard airflow pins
- 1 x Positive post for larger airflow pins
- 9 x Airflow Pins
- 1 x Serial number authenticity card
Customers praised this RBA bridge for "great flavor" and versatility, accommodating single or dual coil setups with a large postless deck. "Easy to build on" with "simple wicking" noted. However, some experienced shorting issues, screw stripping, and leaking if not wicked perfectly. Size reduces tank capacity. Includes extensive extras.
Best rba bridge because fitting dual 2.5 I.D. coils is easily done, simple wicking and great flavor with this application. It’s also a breeze to install cotton wick and keeps up with no problems.
Easy to build on, satisfying great crackling. I love how it wicks
Who doesn’t love anything SUSCO… the Kerch is plain awesome
Starting with the good, It's well made, It's machined really nicely. just having a lot of issues. I keep having shorting issues when it's fully installed. The screws that hold the leads of your coil have already stripped, which I think is causing the shorting. If you don't wick is perfectly then its going to leak. A lot. The seal that goes on the airflow pin has already cracked as well, causing more leaking issues.
The size is a double edged sword, it's nice to accommodate a bunch of different coil and size configurations. But that size takes up close to double the amount of space of a smaller bridge. Lost a lot of room for liquid in the tank.
All this said, I do like it when it works, and I hope to get the issues figured out and delete the 2 star review one day.
Once again, Vapordna was the only place I could find this RBA on the internet, and it was in stock at a great price! I highly recommend this RBA! I have the Kerch 1.2 and loved it, so when I saw this, I had to pick it up. I love the 4 hole postless deck, and although I prefer to run it with a single coil RDL setup, you could definitely do a dual coil and/or DL setup with this one, no problem. You could even fit two 3mm diameter coils in this thing, if you so desired, but depending on your resistance, you would start producing a lot of heat and end up cooking the ejuice in the tank, especially if you chain-vape like I do. Additionally, this thing comes with the most extras I have ever seen with an RBA... and I have dozens of RBAs. I only wish that it would come with a list to help identify all of the extras, as I was a little confused when I saw that it comes with an extra positive postless section, and an extra insulator ring for certain air pins. Although I have struggled to find any information on the internet for this RBA, and I have yet to checked Facebook, from what I can guess, the extra positive postless section works exclusively with certain air pins, and those air pins require the different insulator ring. Also, it would have been nice to see numbers on the air pins, to help identify them, since it comes with so many, but it's not that big a deal. I like that, despite how your coils are wrapped, clockwise or counterclockwise, it doesn't matter, for a single coil set up, if you simply use the holes diagonal from one another. You will, however, have to either put a few extra wraps than your usual RBA coil or space the wraps on your coil because of the HUGE build deck. The flavor I get is great and the wicking is super easy and conventional. When using a Snailtank, I can leave most of the juice in the tank when I pull the deck out for a rewick, but because it has such a snug fit with the deck, the cap comes along with it, only leaving the chimney section in the RBA. I have not tried MTL in this RBA because I prefer RDL and DL, although I'm pretty sure this thing was not really designed for true MTL. Overall, this thing was a great value and I am happy with my purchase.