Stimy Vapor x 67 Mod Rave Mini 18350 Squonk Mod
Stimy Vapor, with the joint effort of 7even Mod, presents the Rave Mini Squonk Mod; An extremely small and compact vape mod that utilizes a dual MOSFET configuration. This petite bottom feeding vape mod measures at 55mm by 49mm by 24.5mm and can house a 4ml squonk bottle and a single 18350 battery. The Rave Mini does not fall flat reaching the category of high-end, which makes this device extremely limited.
Minimalistic is the term that comes to mind when viewing the Rave Mini. Starting from the top, an oversized fire button that matches the chassis of the device can be seen. This oversized fire button covers the LED lights that indicate the current battery life. There are three colors that correspond with the remaining battery voltage; Green is 4.2V to 3.9V, Blue is 3.9V to 3.7V, Red is 3.7V to 3.3V, and finally when its blinking ten times, the battery is below 3.3V. Adjacent to the oversized firing button the recessed steel plated 510 threading and fire pin. The Rave Mini can only fit 22mm or below atomizers, however due to the recessed stainless steel plating, the chosen atomizer blends in seamlessly with the device. The 510 pin can be manually adjusted and features a reverse threading to help accommodate longer pin atomizers. Around the chassis is an engraved emblem along with a "SixtySeven". A small cutout on the device is present to easily access the 4ml bottle. Removing the squonk bottle can be done with the open section located on the bottom. The proprietary squonk bottle features a nub to easily withdraw it from the housing. Alongside the squonk bottle is a threaded battery cap that houses a single 18350 battery (sold separately) positive up.
Internally, the Rave Mini utilizes a dual MOSFET system to regulate the voltage output of the device. This means that the device features a smart mechanical style output and fires in accordance with the remaining battery voltage. Unique to many devices, this MOSFET can go as low as 0.2 ohm, however, the lowest atomizer resistance is dependant on the battery as well. Water resistant coating is present on the MOSFET to protect it from any accidents.
Small, yet precise, the Rave Mini Squonk Mod by Stimy Vapor and 67 Mod is an amazing device to own for those looking for a small setup.
- Smart Mechanical Style Output
- 80W Maximum
- 3.7V to 4.2V Working Voltage
- 3.3V Cut-Off Battery
- 0.2 ohm Lowest Atomizer Resistance Range
- Lowest Atomizer Resistance Dependant on Battery
- Dual MOSFET Regulated
- Water Resistant Coating
- 4ml Squonk Bottle
- Nub Pull Out Tab
- Single Button Control Face
- Oversized Firing Button
- Threaded Battery Door Cover
- Houses a Single 18350 mAh Battery
- Sold Separately
- Battery Life Indicator
- 4.2V to 3.9V
- 3.9V to 3.7V
- 3.7V to 3.3V
- Red Blinking 10 Times
- Lower than 3.3V
- Recessed Stainless Steel Plated 510 Threading and Firing Pin
- Manually Adjustable Silver Plated Center Pin
- Reverse Threaded
- Silver Plated Contact Points
- Accommodates 22mm or Below Atomizers
- One Stimy Vapor x 67 Mod Rave Mini Squonk Mod
- One 4ml Squonk Bottle
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.