Cthulhu Mulan 22mm MTL RDTA
CMULAN-1
Cthulhu Mulan 22mm MTL RDTA
The Cthulhu Mulan RDTA is a rebuildable tank atomizer designed for a single coil mouth to lung vaping style. The Mulan RDTA's build deck is a dual post single terminal build deck and has an adjustable airflow hole located at the top of the RDTA which siphons air directly to the build deck allowing for direct contact with the coil. With a clean black finish the Mulan will look fantastic on a multitude of mods. For user customization, an added 2ml acrylic tank and a black MTL drip tip is included in the package.
Going further in depth with the Mulan, this rebuildable tank atomizer measures in at 22mm base diameter, allowing compatibility with most, if not a wide variety of vape mods on the market. The Mulan can be filled with E-liquid through a friction fit top cap. This top fill design and can accommodate a maximum of 2ml with the pre-installed straight glass tank section and for those that prefer a acrylic tank a 2ml capacity frosted acrylic tank is included in the packaging. Airflow can enter the RDTA through a single adjustable airflow hole located on the top cap section of the atomizer. This airflow control hole measures 2mm in diameter and can be fully closed off.
The Mulan RDTA's internals feature a dual post single terminal build deck that features two top mounted phillips screws. Smooth, controlled direct air beneath the coil allows for amazing flavor in each puff. The overall build deck dimensions measure in at 6mm by 6mm and can accommodate a single coil build configuration. Featuring two large wicking ports located on the sides of the coils. This allows for fluid and smooth wicking with little to no dry hits. As a added feature the Mulan comes with a bottom feed squonk pin, enabling users to expand their high capacity squonk bottles with 2 extra milliliters of e-juice.
Overall the Mulan MTL RDTA by Cthulhu is a great example of an excellent mouth to lung RDTA, and remains a solid option for builders and flavor chasers alike.
Check out Vaping with Vic Video Review HERE!
Product Specifications- 22mm Diameter
- 304 Stainless Steel Construction
- 2ml E-liquid Capacity
- Top Fill
- Friction Fit Top Fill
- One Fill Port
- External Adjustable Airflow Control
- Single 2mm Diameter
- Fully Closeable
- Dual Post Build Deck
- PEEK Insulator
- Single Terminal
- Top Mounted Flathead Screws
- 6mm by 6mm Build Deck
- Single Coil
- Two Side Wicking Cutouts
- 510 Drip Tip Compatible
- 4mm Bore
- 3mm MTL Drip Tip
- One Mulan MTL RDTA
- One Accessory Pack
- One Frosted Replacement Tank
- One MTL 510 Drip Tip
- One User Manual
Check out the Cthulhu Mulan MTL RDTA infographic to help you better understand how it works!

All orders have a processing time of 24-72 hours
Please refer to our Domestic Shipping and International Shipping pages for more detailed information.
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
- flavor
- 18650
- Aegis
- MTL tank
- Works
- draw
- battery life
- squonker
- capacity
- wattage
This is a great MTL tank. well made, smooth draw, great flavor. If you don't mind the small capacity. But put it on a squonker like the Aegis with an 18650 and the battery life is great and the capacity won't matter.

















