Wotofo x Rig Mod Flux 200W Starter Kit
Wotofo, in collaboration with Rig Mod, presents the Flux 200W Starter Kit, a simple and effective kit with 200W max wattage output, a 1.3 inch OLED Screen, and is paired with the Flow Pro Sub-Ohm Tank. The Flux has a wattage range of 5 to 200W, has a minimum atomizer resistance of 0.08 ohm. It features three power modes: Standard, Powerful, and Powerful+ Mode. Powerful and Powerful + Mode features an increased firing speed and an quicker ramp up time. The 1.3 inch OLED Display screen shows the output mode, output wattage, output voltage, atomizer resistance, and individual battery life indicators. The Flux sports a three button interface with an oversized firing panel that covers the entire side of the device, and two adjustment buttons on either side of the screen. The Flux has a customizable LED light strip that flashes seven different colors and has five lighting patterns: off, single light flash, single light breath, seven color flash, and seven color breath. The dual 18650 batteries (sold separately) can be accessed through a bottom latch door. The Flux allows for 1.5A charging through a micro USB port in front of the device and also supports firmware upgrading. This starter kit also includes the Flow pro Sub-Ohm Tank, which comes with two 0.18 ohm mesh coils. This Sub-Ohm tank is compatible with SMOK Baby Beast Coils. The Flow Pro features a knurled bottom adjustable ring with three fully adjustable air ports. The curved drip tip has been designed to allow for maximum seal while vaping. The juice can be refilled with a push to open top cap and has a jucie capacity of 5.0ml with the preinstalled bubble glass and 4.0ml with the standard glass tube. The Wotofo x Rig Mod Flux Starter Kit is a solid starter kit for beginners looking for simple and dependable mod paired with a Sub-Ohm tank that is compatible with an expansive list of coils.
The Wotofo FlowPro Sub-Ohm Tank is compatible with the SMOK TFV8 Baby Beast Replacement coils!
RiP Trippers Reviews the Wotofo x Rig Mod Flux 200W Starter Kit
- 5 to 200W Output Wattage
- 0.08 Minimum Atomizer Range
- Three Power Modes
- Powerful Mode
- Powerful + Mode
- Quicker Ramp Up Time and Firing Speed
- 1.3 inch OLED Display Screen
- Output Mode
- Output Power
- Output Voltage
- Atomizer Resistance
- Individual Battery Life Indicators
- Three Button Control Face
- Oversized Large Side Firing Panel
- Customizable LED Lighting
- 5 Lighting Patterns
- 7 Customizable Colors
- Bottom Latch Opening Battery Door
- Accepts Two High Amperage 18650 Batteries (sold separately unless otherwise stated)
- 1.5A Maximum Charging
- Micro USB Update and Charging Port
- Spring Loaded Stainless Steel 510 Connection
- PCB Temperature Overheat/Low Power/PCB Atomizer Short/ No Atomizer/Low Resistance/Ohms Too High Protection
- 91.6mm by 50.8mm by 30.0mm
- 25mm Diameter
- Sliding Top Fill System
- Pour to Fill
- 5.0ml Bubble Glass Maximum Capacity
- 4.0ml Regular Glass Maximum Capacity
- Wotofo Flow Pro Coils
- Mesh Coil
- 0.18 ohm
- Recommended Output Range
- 40 to 60W
- Compatible with SMOK Baby Beast Coils
- Triple Adjustable Bottom Airflow
- Curved Drip Tip for Improved Inhalation
- 510 Drip Tip Adapter
- One Flux 200W Box Mod
- One Flow Pro Sub-Ohm Tank
- One 510 Drip Tip Adapter
- One Spare Bubble Glass
- One Extra Coil Head
- One QC Micro USB Cable
- User Manual
- Warning Card
- Shipping and Returns
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.