Vapefly x German 103 Brunhilde Top Coiler RTA
Due to the nature of manufacturing and design, each Vapefly x German 103 Brunhilde Top Coiler RTA drip tip colors come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
Vapefly and German 103 work together to bring the Brunhilde Top Coiler to life. The Brunhilde RTA is an amazing double coil rebuildable tank atomizer with adjustable top airflow, a whopping 8ml juice reservoir, and german stainless steel wire for continuous saturation. The Brunhilde has a unique internal chamber within the build deck to provide amazing airflow.
The Brunhilde comes pre-installed with four German steel wires inside the reservoir allowing the cotton to saturate through the 8ml of E-liquid it holds. The Stainless Steel wires ensures that users will use every single drop that the Brunhilde holds. The build deck of this RTA has a single post, four terminal design that is intended to fit a dual coils. Each terminal is 3mm by 3mm and is secured by side mounted hex screws. The build deck features a raised wall with air slots in order to create delicious flavor with each hit. The walls have six 0.5mm wide air slots that direct airflow below the build deck. Externally the top cap of the Brunhilde acts as the airflow control ring, allowing users to adjust their airflow through fully open, closed, or halfway through. Located between the airflow, closer to the tank, is the easy access fillport. The fill port is marked with three drop emblems for a more visual aid. The body of the Brunhilde consist of Stainless Steel, Pyrex glass, and a 24K gold plated contact. Packaged along the Brunhilde are a pair of firebolt cotton cotton and a pair of pre-built 0.35 ohm coils (26ga*2(KA1) 36ga(Ni80) framed coils. The Brunhilde by Vapefly has a 9mm wide 810 bore drip tip that comes in a unique resin color, along with a 510 drip tip adapter. The Brunhilde 25.20mm RTA is a minimalist, yet gorgeous RTA that is made to provide amazing performance in an extremely convenient package.
Jay Haze reviews the Brunhilde Top Coiler RTA Here!
- 25.20mm Diameter
- Single Post Quad Terminal Build Deck
- Dual Coil Design
- 3mm by 3mm Terminal Slots
- Side Mounted Hex Screws
- Airslots Into Build Deck Chamber
- Two 3.5mm Wide Build Deck Base Air Slots
- Two 1mm Diameter Air Holes Along Build Deck Chamber
- PEEK Insulated
- Dual Coil Design
- 8ml Tank Capacity
- Single Side Fill Slot
- Stainless Steel Wicking
- From Germany
- Dual Adjustable Top Air Slots
- 1mm by 1mm each Airslot
- Fully Adjustable
- 8mm Wide Bore Resin Drip Tip
- 510 Drip Tip Compatible with Adapter
- 304 Stainless Steel and Glass Construction
- Gold Plated 510 Contact
- 65.50mm by 25.20mm
- One Brunhilde Top Coiler RTA
- One 510 Adapter
- Spare Parts Bag
- Two Firebolt Cotton
- Two 0.35 ohm Prebuilt Coils
- 26ga*2(KA1)+36ga (Ni80)
- Spare Glass Tank Section
- Stainless Steel Wire from Germany
- User Manual
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.