Steam Crave GLAZ 31mm RTA V2
The GLAZ RTA V2 by Steam Crave is the ultimate dual coil RTA, offering clean and crisp flavor thanks to the all glass chimney and chamber. The GLAZ was designed with flavor in mind and each component was engineered to deliver the best taste eJuice has to offer. But don't be fooled, this RTA is more than capable when it comes to cloud production as well with its post-less dual coil build deck and bottom angled airflow design. The GLAZ RTA stands at 58mm from base to drip tip, is 31mm in diameter, and weighs in at 3.7 ounces.
Steam Crave put a lot of thought into the creation of this atomizer, and it shows in every feature. A beautiful diamond knurled airflow control ring allows the user to adjust the dual seventeen 1.25mm airholes, which lead to the angles airflow channels located on the outer edges of the build deck. The deck itself is a new dual coil post-less design with 2mm terminals and side mounted hex screws. Adjacent from the airflow channels are two large wicking channels which allow the user to easily wick and re-wick the atomizer.
The unique feature of which this atomizer was built around is the all glass chimney and chamber section which is secured inside the tank section via a top o-ring and four bottom brackets. This feature offers the cleanest and most pure flavor to come out of a RTA when compared to the traditional stainless steel chamber section. Housing the glass chamber section is a stainless steel framed tank section with interchangeable glass tube. The standard glass section holds 7ml of vape juice, while the included glass bubble section holds a total of 10ml! The GLAZ is easily filled via the smooth sliding top fill system that has a recessed extra wide fill port.
RiP Trippers Reviews the Steam Crave GLAZ Here!
- 31mm Diameter
- Push to Open Top Fill
- 7ml Standard Glass Tank Section E-Juice Capacity
- 10ml Bubble Glass Tank Section E-Juice Capacity
- Postless Dual Coil Build Deck
- 2mm Each Terminal
- Side Mounted Hex Screws
- Dual Wicking Ports
- PEEK Insulated Positive Post
- Glass Chimney
- Adjustable Bottom Airflow
- Knurled Design
- Stacked Airflow Slots
- 17 Airflow Slots
- 1.5mm Each Slot
- Fully Adjustable
- 9mm bore 810 Drip Tip
- Gold Plated 510 Pin
- One Glaz RTA V2
- One Spare 7ml Glass Tank Section
- One Spare 10ml Bubble Glass Tank Section
- One Spare Chimney Glass
- One Vape Band
- One Allen Key
- Spare Parts Pack
- User Manual
- Steam Crave Sticker
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.