Rincoe Manto X Mesh 228W Starter KitDesigned in the USA
The Rincoe Manto X Mesh 228W Starter Kit is an outstanding combination with an extremely portable dual 18650 battery box mod and a mesh sub-ohm tank supported by a versatile list of replacement coils. The Manto box mod has been made for maximum convenience with four output modes and 2A charging.
The Rincoe Manto X is a dual 18650 platform with variable wattage output, full temperature control suite, TCR mode, and bypass mode. The VW mode has an output range of 1 to 228W while the temperature mode supports titanium, nickel, and stainless steel with a wattage output range of 200 to 600 Degrees Fahrenheit. The TCR mode supports three independent memory modes. The 1.3 inch OLED display screen shows output mode, output temperature, output power, output voltage, output current, atomizer resistance, and dual battery life indicator. The Manto X has a three button control interface; an over sized firing button and two directional adjustment buttons. The battery is secured by a slide and lock battery access door that accepts two high amperage 18650 batteries (sold separately). The Manto X also supports 2A charging and firmware upgrades through a micro USB port located below the adjustment buttons on the device. The Manto x Mesh Starter Kit would not be complete without the Metis mix Sub-Ohm tank. This tank measures in at 25mm wide and 51.2mm tall. Its 6ml juice capacity can be refilled through the threaded top cap and two juice fill ports. The Metix Mix uses a proprietary line of replacement mesh coils. The single mesh is rated at 0.15 ohm best used at 40 to 70W, the dual mesh is rated at 0.2 ohm and best at 60 to 90W, the triple mesh is rated at 0.15 ohm and best at 80 to 100W, and the Q4 quad mesh coil is rated at 0.15 ohm, best used at 120 to 180W. The Metis Max features a bottom adjustable airflow ring with two 9mm by 3mm airslots and a 15mm wide 810 bore resin drip tip. The Rincoe Manto X Mesh is a portable, yet powerful combination that is sure to provide a great and long lasting experience.
Dual 18650 Platform
- Variable Wattage Output
- 1 to 228W Output
- Full Temperature Control Suite
- Titanium Support
- Ni200 Nickel Support
- Stainless Steel 316 Support
- TCR Mode
- Three Memory Modes
- 200 to 600 Degrees Farenheit
- Bypass Mode
- 1.3 Inch OLED Display Screen
- Vertical Stack
- Output Mode
- Output Temperature
- Output Power
- Output Voltage
- Output Current
- Atomizer Resistance
- Dual Battery Life Indicator
- Three Button Control Face
- Slide and Lock Battery Access Door
- Accepts Two High Amperage 18650 Batteries (sold separately)
- 2A Maximum Charging
- Micro USB Update and Charging Port
- Gold Plated Spring Loaded Contacts
- 51.2mm Tall
- Threaded Top Fill Cap
- Dual Fill Ports
- 6ml Maximum Capacity
- Metis Max Coil Family
- Single Mesh Coil
- 0.15 ohm
- 40 to 70W
- Dual Mesh Coil
- 0.2 ohm
- 60 to 90W
- Triple Mesh Coil
- 0.15 ohm
- 80 to 100W
- Q4 Mesh Coil
- 0.15 ohm
- 130 to 180W
- Single Mesh Coil
- Stealth Dual Bottom Airflow Control
- 9mm by 3mm Each Airslot
- Fully Closeable
- 15mm Wide Bore 810 Resin Drip Tip
- Gold Plated 510 Connection
- 75mm by 40mm by 37mm
- One Rincoe Manto X 228W Mod
- One Metis Mix Tank
- One 0.15 ohm Single Mesh Coil Head
- Spare Parts Bag
- One Micro USB Cable
- User Manual and Warning Card
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.