Wotofo x Mr.JustRight1 Profile 25mm RDTA

Wotofo x Mr.JustRight1 Profile 25mm RDTA

Wotofo x Mr.JustRight1 introduces the Profile 25mm RDTA. This new version of the Profile shares the same upper design, yet incorporates new mesh strips, bottom feed capabilities, a 6.2ml lower tank section and an improved build deck. The Profile RDTA retains the simplified building process through the use of pre-cut mesh strips and contains the newest versions of nexMesh for a exquisite flavor oriented vaping experience.

The Profile RDTA features a dual clamp, mesh coil compatible build deck, perforated top cap airflow, and a spring loaded central ceramic support platform. Wotofo Profile's design incorporates a wide clamp style, dual post build deck that accommodates both mesh style coil sheets and regular performance coils. Two side-mounted Phillips screws allow for easy and secure installation. This package comes with three different nexMesh Wotofo Mesh Style Coils, 17mm by 8.5mm sheets that have various atomizer resistances, and a recommended wattage between 50 to 90W. Wotofo has introduced the newest nexMESH, mesh strips designed specifically for the Profile RDTA with the industry's finest micro-weave design that delivers unreal flavor and vapor production. Mesh strips can be perfectly shaped to fit the Profile's build deck using the included mesh bending tool. The Profile RDTA carries the solution for cotton wicking issues commonly found with mesh RDA's, through the use of a spring loaded ceramic support deck. The ceramic platform applies constant pressure to the cotton, ensuring that it is always in contact with the mesh strip. The 24K gold plated bottom feed pin also directly sends  e-liquid to the top of the ceramic support deck, directly wicking cotton when using a mesh coil. With the addition of a removable tank section and stainless steel wicks, users maximize the e-liquid capacity to a whopping 6.2ml's. If dripping of bottom fed capabilities are preferred this tank section can be removed in order to use the atomizer in a RDA fashion.

Wotofo Profile RDTA features a two piece top cap: an airflow adjustment upper segment and a body with perforated airflow holes. Its upper segment has a dual step airflow adjustment design that can be rotated to suit the user's needs. Whether wide open or fully closed off the adjustment ring smoothly operates with a single o-ring. The main body features nineteen 1mm air holes per side, aligned with the deck to provide ample airflow to the coil. The body has two notches that align with the base of the atomizer that secures the top cap in place and ensures proper airflow alignment while closing off the fill port for the tank section. In line with the the Profile's minimalist design, the logo is laser etched on the upper portion of the top cap. The Wotofo Profile RDTA has a 5mm deep juice well when ran in the RDA mode. This package comes with a pre-installed 10mm bore 810 wide resin drip tip and an alternate grey frosted drip tip. The Profile RDTA comes with a bottom fed gold plated 510 pin, a standard gold plated 510 pin and a extended tank section with a built in gold plated 510 pin. The Wotofo x Mr.JustRight1 Profile RDTA retains its easy to build status while extending e-liquid capacity to the highest level.

Check out DJLsB's Video Review HERE!

• 25mm Diameter
• 52.7mm Height
• Stainless Steel Construction
• 6.2ml E-Liquid Capacity
• Removable Tank Section
• Can be Converted to a RDA
• Stainless Steel Wicking Ropes
• Wide Clamp Style Dual Post Build Deck
  • 10mm by 5mm Each Terminal
    • Side Mounted Phillips Screws
  • PEEK Insulated Positive Post
  • 5mm Deep Juice Well
  • Interchangeable Mesh and Coil Build Styles
  • Spring Loaded Central Ceramic Support
• Adjustable Airflow
  • 19 Airflow Holes Each Side
    • 1mm Each Hole
• 24K Gold Plated Bottom Feed 510 Contact
  • 510 24K Gold Plated Squonk Pin
• 10mm Bore 810 Drip Tip
• nexMesh Coil Sheets Included
• nexMesh Extreme
  
  • Kanthal A1
  • 0.16 ohm
  • 17mm by 8.5mm
  • 60 to 80W Recommended Wattage
• nexMesh Clapton
• Kanthal A1
• 0.2 ohm
• 17mm by 8.5mm
• 50 to 70W Recommended Wattage
• nexMesh Turbo
• Kanthal A1
• 0.13 ohm
• 17mm by 8.5mm
• 60 to 80W Recommended Wattage

• One Wotofo Profile RDTA
• Two 6mm Xfiber Cotton Strips
• Two 3mm Xfilber Cotton Strips
• One Extra 810 Drip Tip
• One Crosshead Screwdriver
• One Allen Key Driver
• One Mesh Bending Tool
• Three Mesh Style Coil Sheets
• One nexMesh Clapton
• One nexMesh Turbo
• One nexMesh Extreme
• One Set of Framed Staple Clapton Coils
• One RDA Attachment
• One Set of Extra Stainless Steel Wicking Columns
• One Spare Parts Bag
• One User Manual

Check out the Wotofo Profile RDTA infographic to help you better understand how the product works!