Wismec Sinuous FJ200 and Divider Sub-Ohm Tank Starter Kit
Designed in the USA
The Wismec Sinuous FJ200 and Divider Sub-Ohm Tank Starter Kit continues the design style of the Predator and features an integrated 4600 mAh battery. The Sinuous FJ200 features a wattage output rating of 1.1 to 200W with support down to 0.1 to 3.5 ohms and is aided by an improved buck-boost technology for a steadier power output. Temperature control is also present, with native support for Ni200 Nickel, Titanium, and Stainless Steel heating elements alongside adjustable TCR support. A 1.3 OLED screen displays important information to the user. The Sinuous FJ200 is powered by an internal 4600 mAh battery, which can be charged via usb port up to 2A. A reset button can be found on the bottom of the device. A LED indicator light can be seen above the OLED screen and lights up when the device is fired. Included with the Sinuous FJ200 is the Divider Sub-Ohm Tank, a 2ml capacity tank with that can be easily switched to 4ml by removing the chamber reducer in the inside of the tank. The Divider uses the WS Coil Family with comes with one WS01 0.2ohm Triple Coils that is rated for 40 to 80W and a WS02 0.25ohm Triple Coil that is rated 40 to 120W. With its modernized form factor, alongside 200W of power, the Wismec FJ200 and Divider Sub-Ohm Tank Starter Kit is a top choice for those looking for a powerful internal battery device!
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
- 1.1 to 200W Output Range
- 0.1 to 3.5 ohm Atomizer Resistance Range
- 0.5 to 8V
- Preheat Function
- Firmware Upgradeable
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316L Support
- Pre-Heat Capable
- Adjustable Three Memory TCR
- Fine Tune Temperature Output
- 200 to 600 Degree Fahrenheit Range
- 0.05 to 1.5 ohm Atomizer Resistance Range
- 1.3 Inch OLED Side Screen
- Vertical Stack6
- Output Temperature
- Output Wattage
- Output Voltage
- Material and Mode Selection
- Atomizer Resistance
- Output Current
- Battery Life Indicator
- Stealth Capability
- Three Button Control
- Adjustment Buttons
- Squeeze Fire Button
- Adjustment Buttons
- LED Indicator Light When Firing
- On Board Charging
- 2A Max Charge Current
- Micro USB Port
- Internal 4600 mAh Battery
- Reset Button Found on the Bottom of the Device
- Stainless Steel 510 Threading
- Spring Loaded Gold Plated Contact
- 28mm Capable
- No Atomizer/Atomizer Low/Atomizer Short Circuit/Temperature Alert/10 Second Overdraw/Weak Battery/Low Power/USB and Battery Imbalance Protection/Reverse Polarity Protection/Dual Circuit Protection
- 45mm by 29mm by 123.4mm
- 25mm Diameter
- Slide Top Fill System
- 2ml Tank Capacity
- Increase Tank Capacity to 4ml by Removing the Chamber Reducer
- 2ml Tank Capacity
- Wismec WS Coil Family
- 0.2 ohm
- Triple Vertical Coil
- 40 to 80W
- 0.25 ohm
- Triple Vertical Coil
- 40 to 120W
- Dual Adjustable Bottom Airflow System
- 12.5mm by 3mm Each Airslot
- Fully Closeable
- Stainless Steel and Glass Construction
- One Wismec Sinuous FJ200 Mod
- One Wismec Divider Sub-Ohm Tank
- One 0.2 ohm Triple Coil Head
- One 0.25 ohm Triple Coil Head
- QC USB Cable
- Spare Parts Kit
- User Manuals
- Warning Card
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.