VENVII Baby Ness 2X700 120W TC Box Mod
VENVII returns with one of their classics, the Baby Ness, a 120W maximum output box mod with a full temperature control suite, the capabilities of utilizing either an 18650, 20700, or 21700 battery while retaining the form-factor we all know and love. The Baby Ness utilizes a crisp 0.91 inch OLED screen that sits on the side of the device and indicates the essential information Vapors need to see. The Baby Ness is operated by a three button interface, and has 2A quick charging capability via micro USB port. The single high-amperage 21700, 20700 or 18650 (each sold separately) are housed on the side of the Baby Ness through a magnetic battery door. The Baby Ness' maximum wattage output differs for each batteries installed; with the 18650 or the 20700, the Baby Ness has a maximum wattage output of 80W, with the 21700 the Baby Ness is capable of 120W. The Baby Ness is also capable of different wattage moods such as BOOST, Smooth, Curve, and Normal. The Baby Ness is capable of multiple temperature control modes from Ni200, Titanium, Tungsten, SS304, 316, 317, and TCR. With a whole new small form factor that is comfortable to hold, with the capability of using either a 18650, 20700 or 21700 battery, the VENVII Baby Ness 2X700 120W TC Box Mod is perfect for those who enjoy portable yet powerful devices!
VENVII Baby Ness Box Mod
- Baby Ness Proprietary Chipset
- 5 to 80W
- With 18650 or 20700 Battery (sold separately)
- 5 to 120W
- With 21700 Battery (Sold Separately)
- 0.05 to 2.0 ohm Atomizer Resistance Range
- 0.20 ohm Recommended
- 0.5 to 8.5V Output Voltage
- BOOST Mode Support
- Smooth Support
- Curve Support
- Normal Support
- 5 to 80W
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS304,316,317 Support
- TCR (5 Saveable Profiles)
- Dry Sense Support
- 0.05 to 1.5 ohm Atomizer Resistance Range
- Magnetic Battery Cover
- Fits a Single 21700, 20700 or 18650
- Batteries Sold Separately
- 0.91 Inch OLED Screen
- Temperature Mode and Output
- Output Power
- Atomizer Resistance
- Battery Life Indicator
- Output Voltage
- Puff Counter
- Power Indicator
- Classic Form Factor
- Three Button Control Interface
- Over Sized Firing Button
- Adjustment Buttons Located on the Bottom
- Micro USB Charging Port
- Charges up to 2A
- Firmware Upgradeable
- Stainless Steel 510 Threading
- Accommodates Up to 28mm Atomizer Diameter
- Gold Plated Contact
- Reverse Polarity Protection/Thermal Cut-Off Protection/Battery Protection/Short-Circuit Protection/Auto Fire Protection
- One VENVII Baby Ness 2X700 120W TC Box Mod
- Micro USB Charging Port
- User Manual
- One 18650 Adapter
- Shipping and Returns
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.