SMOKtech Koopor Knight 80W TC Full Kit
The SMOK Koopor Knight 80W TC Full Kit consists of the Koopor Mini2 Box Mod, capable of 1 to 80W and a full temperature control suite, and the Helmet Sub-Ohm Tank, measuring at 24.5mm and a top adjustable airflow. The Koopor Mini2 is a portable mod with a maximum power output of 80W, a complete temperature control suite, and utilizes a single high amperage 18650 batteries (sold separately). The temperature control suite supports the use of nickel, titanium, and stainless with an adjustable temperature range of 200 to 600 degrees. The Koopor Mini2 also has an OLED screen that displays output wattage or temperature, output voltage, mode and heating element, battery life indicator, and atomizer resistance. The ergonomic three button control design allows the user to navigate through the settings easily. The single high amperage 18650 battieres are housed through a easy to slide off magnetic battery door. Along with the Koopor Mini2 is the Helmet Sub-Ohm Tank, a 24.5mm tank with top adjustable airflow. The Helmet Sub-Ohm Tank utilizes the Helmet Coil heads, the 0.4 ohm and 0.6 ohm, which brings great flavor and clouds. The SMOKtech Koopor Knight 80W TC Full Kit is a great and affordable mod for beginners looking for a simple and easy to use device.
1 to 80W Maximum Power Output
- 0.8 to 9.0V
- 0.10 to 3.0 ohm Atomizer Range
- Temperature Control Output
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Adjustable Initial Resistance
- 200 to 600 degree Fahrenheit Output Range
- 0.06 to 2.0 ohm Atomizer Resistance Range
- Side Mounted OLED Screen
- Output Wattage or Temperature
- Output Voltage
- Mode and Heating Element
- Battery Life Indicator
- Atomizer Resistance
- Amperage Output
- Innovative and Ergonomic Three Button Control Interface
- Oversized Power Button
- Ergonomic Adjustment Buttons
- Slide to Open Magnetic Door
- Single 18650 Batteries
- Sold Seperately
- Single 18650 Batteries
- Stainless 510 Threading
- 24K Gold Plated Pin
- Aluminum and Zinc Alloy Construction
- Intelligent Atomizer Recognition/Puff Monitoring System/Overheating Protection/Short-circuit Protection/Low Battery Warning
- 24.5mm Diameter
- Threaded Top Fill
- 2ml Tank Capacity
- Compatible with the Helmet Family Coils
- 0.6 ohm
- 25 to 60W
- 0.85 ohm
- 25 to 55W
- Best at 40W
- 1.0 ohm
- 15 to 35W
- Helmet-CLP 0.4 ohm
- 0.4 ohm
- 20 to 45W
- Quad Adjustable Airflow
- 510 Threaded Contact Point
- Double Layered Barrel Drip Tip
- One KOPOOR Mini2 Box Mod
- One Helmet Tank
- One 0.6 ohm Coil Head
- One 0.4 ohm Coil Head
- One USB Cable
- One User Manual
- One Spare Parts
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.