Project Sub-Ohm® Edition Vandy Vape Simple EX MTL Squonk Starter Kit
Vandy Vape enters the scene with the collaboration of Project Sub-Ohm® and introduces the first ever squonk device that primarily uses Nicotine Salt E-Liquid, the Simple EX! The Simple EX features a 3.3 to 4.5 adjustable output voltage and comes paired with it's own matching rebuildable atomizer. The Project Sub-Ohm® Edition Simple EX features an beautiful frosted white magnetic bottom feed door cover that matches the top cap of the RDA along with a blue 4ml squonk bottle, fire button, and adjustment buttons. Located on the top of the device is the PSO serialization, making each device unique due to the limited quantity. Other Project Sub-Ohm® details and emblem can be found on each side of the device. The Vandy Vape Simple EX is powered by an 850mAh built in battery and can be charged via USB port. The Vandy Vape Simple EX is true to it's name, Simple. With a minimalist yet stylish design, the Simple EX measures at 42mm by 84mm by 58.5mm making it small and easy to carry. The Simple EX uses a 4ml Squonk bottle and is housed through a magnetic PC constructed bottom feed door. The Simple EX allows users to only change the output of the device from 3.3V, 3.6V, 3.9V, 4.2V, and 4.5V. The display of the Simple EX only displays the remaining battery life and the output voltage. Along with the Simple EX is the matching Simple EX 21mm RDA. The Simple EX RDA features a PC top cap but can be switched off with a stainless steel top cap that comes with the kit. The build deck of the Simple EX features a dual post, single 2mm by 3mm terminal build deck style designed to hold thinner gauge performance coils, and are held down by top mounted flat head screws. Located on the bottom of the Simple EX are six different airflow settings, all in which are adjustable via top cap. From largest to smallest; the 2.5mm airflow slot is meant for 4.5V and restricted direct lung hit. The following sizes are intended for use with MTL vaping: the 2.0mm airflow is meant for 4.2V and recommended to be used with 10 to 20mg salt nic, 1.5mm is meant for 3.9V and recommended to be used with 20 to 30mg salt nic, the 1.0mm airflow slot is meant for 3.6V and recommended to be used with 30 to 40mg salt nic, the 0.8mm airflow slot is meant for 3.3V and recommended to be used with 40 to 50mg salt nic, and finally, the 0.6mm airflow slot is meant for 3.3V and 50 to 60mg of salt nic. Located on the top of the Simple EX RDA is a 8mm bore drip tip that acts as a top cap. With the stainless steel top cap, users may change their drip tip with either a 4mm PC 510 drip tip or a 3mm Delrin 510 Drip Tip. Perfectly paired and amazingly SIMPLE, the Project Sub-Ohm® Edition Vandy Vape Simple EX MTL Squonk Starter Kit is an amazing and intuitive new squonk device that delivers the customization and the power output that we've all wanted from an ultra portable device.
- 3.3 to 4.5 Output Voltage
- 0.8 to 3.0 ohm Atomizer Resistance Range
- 0.5 to 8.5 Voltage Output Range
- OLED inch Screen
- Diagonal Arrangement
- Output Voltage
- Battery Life Indicator
- 4ml Squonk Bottle
- Held by Magnetic Door Cover
- Three Button Control Face
- Oversized Firing Button
- Dual Adjustment Buttons
- Built-in 850 mAh Battery
- USB Port
- Stainless Steel Plated 510 Threading and Firing Pin
- Spring Loaded Gold Plated Center Pin
- Gold Plated Contact Points
- Device Safety Features
- Overtime Protection/Atomizer Checking/Low Power/Short Atomizer/High or Low Resistance Warning/Overheat Protection
- 42mm by 58.5mm by 24mm
- 21mm Diameter
- Single Terminal Dual Post Build Deck
- 2mm by 3mm
- Top Mounted Flat Head Screws
- PEEK Insulator
- 8mm Deep Juice Well
- 2mm by 3mm
- Adjustable Bottom Airflow Ports
- Single Airflow
- Recommended Voltage 4.5V
- Recommended Voltage 4.2V
- 10 to 20mg Recommended Nicotine Salt Use
- Recommended Voltage 3.9V
- 20 to 30mg Recommended Nicotine Salt Use
- Recommended Voltage 3.6V
- 30 to 40mg Recommended Nicotine Salt Use
- Recommended Voltage 3.3V
- 40 to 50mg Recommended Nicotine Salt Use
- Recommended Voltage 3.3V
- 50 to 60mg Recommended Nicotine Salt Use
- Single Airflow
- 24K Gold Plated Bottom Feed 510 Contact
- 304 Stainless Steel
- 8mm Bore PC 510 Drip Tip
- 3mm Bore Delrin 510 Drip Tip
- 4mm Bore PC 510 Drip Tip
- One Simple EX Squonk Mod
- One Simple EX RDA
- One Stainless Steel Top Cap
- One PC Drip Tip
- One Delrin Drip Tip
- One Instructional Manual
- One Spare Parts Bag
- Two Superfine MTL Fused Clapton Coils
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.