Mechlyfe Slatra 25mm BF RDA
Mechlyfe Slatra is a beautifully crafted rebuildable dripping atomizer. This mesh RDA comes with a unique and innovative post-less design along with bottom feeding capabilities. Another feature the Slatra holds is the unique dual airflow ports which create a smooth and elegant vaping experience.
Beautifully constructed, the Slatra features a smooth design from the drip tip to the base. The Slatra's drip tip measures in at 12mm and features a wide bore design for optimum flavor. Knurling is present to allow smooth airflow adjustments from the dual triple airflow slots. In addition, the Airflow control ring is equipped with a stepped adjustment to allow for a tighter draw. These dual triple airflow slots allow air intake to directly hit the coils installed and each one measures in at a 1mm diameter per air hole. Located on the bottom of the Slatra RDA are well placed laser engraved logos and the 510 gold plated pin. This 510 pin can be easily swapped out with the included bottom feed pin to make it squonk ready.
Moving onto the build deck, Mechlyfe implemented an innovative post-less build deck design. This large format build deck measures at 15mm by 3mm for each terminal, allowing users to use their preferred mesh coil or the pre-cut Mechlyfe mesh coils. Each coil is held down by Phillips screws that can accommodate 18mm by 6mm sized mesh coils. Surrounding the entire circumference of the build deck is a whopping 4mm e-liquid reservoir, perfect for those using the Slatra as a bottom feed squonking atomizer. Stabilizing the deck to the top cap chamber can be done by aligning each notch, this in turn allows the top cap's airflow to stay within the parameters of the coils.
Mechlyfe has created an all around solid RDA; This elegantly crafted atomizer works perfectly when paired with any box mod, non-squankable or squankable alike.
Check out Mike Vapes Video Review HERE!Product Specifications
- Post-less Build Deck
- Side Mounted Phillips Screws
- Top Mounted Turn Tight Screw
- 4mm Deep Juice Well
- PEEK Insulator
- Dual Airflow System
- 1mm Diameter Airflow Holes
- Eighteen Individual Holes
- Fully Adjustable
- Dual Coil
- Gold Plated 510
- Squonk Pin Included
- 304 Stainless Steel Construction
- 810 Drip Tip
- Resin Material
- 12mm Bore
- One Slatra RDA
- One Screwdriver
- Two Screws
- One O-Ring Bag
- One Mesh Tool
- Two Mesh Coils
- One User Manual
Check out the Mechlyfe Slatra infographic to help you better understand how it works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.