KangerTech Xlum 200W Starter Kit
KangerTech presents the Xlum 200W Starter Kit, a 200W box mod with temperature control suite, adjustable LED light panel, and is paired with the Xlum Sub-Ohm Tank. The Xlum Box Mod has an wattage output range of 10 to 200W, voltage output range of 0.1 to 8V, and atomizer resistance range of 0.05 to 3.0 ohm. The temperature control suite is compatible with Ni200, Ti10, and SS316 and has a temperature range of 200 to 600 degrees Fahrenheit. The TFT color display screen shows the output mode, output wattage, output voltage, ohm resistance and adjustable time display. The KangerTech Xlum Box Mod has a three button interface: an oversized firing button on the side of the device, and a circular button below the screen that can be pressed up or down to navigate the user interface. The LED light panel has several effects that can be adjusted in the user settings.The Xlum Box Mod's batteries can be accessed through a removable magnetic panel and uses two high amperage 18650 batteries (sold separately). The KangerTech Xlum supports up to 2A charging through a micro USB charging port. On top of the Xlum box mod is a spring loaded stainless steel 510 connection. The KangerTech Xlum 200W Starter Kit comes with the Xlum Sub-Ohm Tank, a 4.5ml E-Liquid capacity, and is compatible with the NR Family Coils. This starter kit comes pre-installed with the NR8-OCC 0.2 ohm coils that works well from 30 to 140W and works best at 50 to 90W. The starter kit also comes with NR Mesh 0.18 ohm replacement coil and is best at 35 to 45W. The Xlum Sub-Ohm Tank has a convenient slide to open top fill juice port. The dual airflow can be adjusted with a notched bottom adjustment ring. Each color of the Xlum sub-ohm tank comes with a matching wide 810 bore resin drip tip. The KangerTech Xlum 200W Starter kit is great for users looking for the convenience of a sub-ohm tank and the long lasting power of a dual 18650 box mod.
- 10W to 200W Output Wattage
- 0.05 to 3.0 ohm Atomizer Range
- 0.1 to 8V Output Range
- Temperature Control Suite
- Compatible with Ni200, Ti10, and SS316
- 200 to 600 Degrees Fahrenheit Range
- TFT Color Display Screen
- Output Mode
- Output Power
- Output Voltage
- Atomizer Resistance
- Individual Battery Life Indicators
- Adjustable Time Display
- Three Button Control Face
- Oversized Large Side Firing Panel
- Two Directional Round Adjustment Button
- Adjustable LED Light Panel
- Located Below Firing Button
- Magnetic Panel Battery Door
- Accepts Two High Amperage 18650 Batteries (sold separately unless otherwise stated)
- 2A Maximum Charging
- Micro USB Update and Charging Port
- Spring Loaded Stainless Steel 510 Connection
- Overtime Protection/Short Circuit Protection/Open Circuit Protection/High Temperature Protection/Low Voltage Protection/Resistance Protection
- 48mm by 30mm by 86mm
- 28mm Diameter
- Sliding Top Cap Fill System
- Pour to Fill
- 4.5ml Bubble Glass Maximum Capacity
- KangerTech NR Family Coils
- 0.2 ohm
- 30 to 140W
- Best at 50 to 90W
- NiChrome Heating Material
- NR Mesh Coil
- 0.18 ohm
- 35 to 45W
- Best at 35 to 45W
- Kanthal Mesh Heating Material
- Included In Package
- 0.4 ohm
- 20 to 100W
- Best at 40 to 80W
- NiChrome Heating Material
- Sold Seperately
- Dual Adjustable Bottom Airflow
- 810 Wide Bore Resin Drip Tip
- 28mm by 39mm
- One XLUM Box Mod
- One XLUM Sub-Ohm Tank
- One NR8-OCC NiCr 0.2 ohm Coil
- One NR Mesh 0.18 ohm Coil
- One Spare 4.5ml Bubble Glass
- One QC Micro USB Cable
- User Manual
- Warning Card
- Shipping and Returns
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.