iJoy CAPO 216W Squonker and Combo SRDA Starter Kit
iJoy introduces their new CAPO 216W Squonker Bottom Feed Box Mod with the Combo SRDA, offering a highly functional and compact bottom feed system. The iJoy CAPO 216W can utilize dual high amperage 18650 (sold separately) batteries or dual high amperage 20700 (sold separately) batteries along with a versatile output range capable of outputting 5 to 216W. The 9ml bottom feed bottle and batteries are housed through a snap fit door. The chip designed by IWEPAL features a premiere output system that allows users to operate their device comfortably with ease. The CAPO 216 features a simple design and utilizes a 0.91 inch OLED Screen that offers a clear and concise interface. The Squonk Bottle that comes with the CAPO 216 is a uniquely designed bottle made out of silicone; The silicone bottle features a hard top and bottom for a firm foundation but a soft center which makes it easy to use. Paired with the Capo 216 is the the Combo SRDA, a 25mm unique RDA that utilizes the Combo SRDA Coil family; the SRDA-CE (pre-installed), rated at 0.13 ohm, the SRDA-CF (sold separately), rated at 0.1 ohm, and three separate build decks for user preference (sold separately). The Combo 25mm SRDA utilizes an interchangeable build deck, two of which users can use the special wrench to allow rewicking for continuous usage. Airflow enters the SRDA via dual adjustable airflow slots, measuring at 12.5mm by 1.5mm. The iJoy Combo 25mm SRDA is equipped with a gold-plated bottom feed pin, making it a perfect pair for squonk boxes. The 10mm wide bore 810 ULTEM drip tip allows the user to take in hearty vapor production while minimizing heat transfer. The iJoy CAPO 216W Squonker and Combo SRDA Starter Kit is the perfect setup for those looking for a squonk device with a highly effective and intuitive atomizer.
IWEPAL Designed Chip
- 5 to 216W
- 0.05 to 3.0 ohm Atomizer Resistance Range
- Firmware Upgradeable
- Micro USB Charge Port
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- TCR Functionality
- Temperature Coefficient of Resistivity
- Resistance Read and Lock
- 300 to 600 Degrees Fahrenheit
- Snap-Fit Battery Door
- Accepts Dual High Amperage 18650/20700 Batteries
- 18650 and 20700 Sold Separately
- 9ml Bottom Feeding Squonk Bottle
- Accessible by Taking Squonk Door Off
- Unique Silicon Construction
- Hardened Top and Bottom to Hold
- Soft Center for an Easy Squonk
- Three Button Control
- Enlarged Firing Button
- Adjustment Buttons
- Extra Large 0.66 OLED Display
- Simple Display
- Output Wattage
- Battery Life Indicator
- Atomizer Resistance
- Spring Loaded Stainless Steel Plated 510 Connection
- Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating/Anti Loaded/Timeout Protection
- 45mm by 51mm by 83mm
- 25mm Diameter
- SRDA Interchangeable Build Deck System
- SRDA-CE Deck (Preinstalled)
- Pre-Built Fused Clapton Coils
- 0.13 ohm
- Knurled Top
- Reusable by Re-Wicking
- SRDA-CE Deck (Preinstalled)
- Dual Adjustable Airflow
- 12.5mm by 1.5mm Each Airslot
- 10mm Wide Bore ULTEM Drip Tip
- Gold Plated 510 Squonk Pin
- One iJoy Capo 216W Squonker Mod
- One Combo SRDA
- One SRDA-CE 0.13 Ohm Pre-Installed
- One 9ml Squonk Bottle
- One 18650 Adapter
- Spare Parts Back
- Special Wrench Included
- Warranty Card
- One Micro USB Cable
- User Manuals
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.