GeekVape Lucid 80W TC Starter Kit
GeekVape presents the Lucid 80W TC Starter Kit, an amazing combination of the Lumi disposable sub-ohm tank and the portable, single 18650 battery Lucid Box Mod. This lightweight starter kit is perfect for vapers looking for an easy to use device and the ability to use a disposable vape tank.
The GeekVape Lucid 80W TC Starter Kit uses the AS Chip that has a variable wattage mode with a 5 to 80W and 0.1 to 4.2V output ranges. The temperature control suite has a temperature range of 200 to 600 degrees Fahrenheit and is compatible with Ti, NI, SS and the use of TCR Mode. The Lucid is powered with a single 18650 battery (sold separately) and has a 0.69 inch OLED Screen that displays battery life indicator, atomizer resistance indicator, puff counter, output wattage, output temperature. The box mod has a three button control interface with an oversized firing button, dual adjustment buttons and can be recharged through a micro USB port charged at the rate of 1.5A. The Lucid's body has a plastic and stainless steel construction and has a stainless steel 510 threading with a spring loaded gold plated contact. The Lucid box mod is paired with the Lumi Disposable Sub-Ohm tank which has a 24mm base diameter, measures in at 44.3mm tall, and has a 4ml e-liquid capacity that is top filled and sealed with a silicone plug. The Lumi has bottom adjustable airflow ring with three 2.5mm air holes per side. The body of the Lumi is made of poly carbonate and stainless steel and has a built in 10mm wide drip tip. The built in kanthal mesh coil has an atomizer resistance of 0.3 ohm and can be used between 30 to 45W and has an atomizer resistance of 35 to 40W. This lightweight combination is an excellent starter kit for users on the go, looking for an affordable device.
- AS Chipset
- Variable Wattage Mode
- 5 to 80W Output Range
- 0.1 to 4.2V Output Range
- Temperature Control Suite
- 200 to 600 Degrees Fahrenheit
- Compatible with Ti, NI, and SS
- TCR Mode
- Threaded Battery Top Cap
- Single 18650 Battery Chamber
- 0.69 Inch OLED Screen
- Battery Life Indicator
- Atomizer Resistance Indicator
- Puff Counter
- Output Wattage
- Output Temperature
- Three Button Control Interface
- Oversized Firing Button
- Dual Adjustment Buttons
- Micro USB Charging
- 1.5A Charging
- Chevron Pattern Battery Vent Holes
- Plastic and Stainless Steel Body Construction
- 75mm by 53.7mm by 26.9mm
- 24mm Base Diameter
- 44.3mm Tall
- Built-In Mesh Coil
- 0.3 ohm
- KA1 Mesh
- Recommended at 30 to 45W
- Best at 35 to 40W
- Dispose of Sub-Ohm Tank After Usage
- Top Fill System
- Silicone Plug Seal
- 4ml Standard Capacity
- Three 2.5mm Air Slots Per Side
- Integrated 10mm Wide Drip Tip
- Poly Carbonate Body Construction
- 510 Threaded Gold Plated Contact
- One GeekVape Lucid Box Mod
- One GeekVape Lumi Disposable Sub-Ohm Tank
- One Spare Parts Pack
- One USB Cable
- One User Manual
- One Promotion Card
- One Warranty Card
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.