GeekVape Blade 235W TC Starter Kit
The Blade Box Mod by GeekVape is a 235W box mod with a full temperature control suite that is designed to extremely and can be powered by using a single, 18650
This product has been discontinued, Click HERE to see more Starter Kits!
AS Chip Set
- 5 to 235W Output
- 0.05 to 3.0 ohm Atomizer Resistance Range
- 6.2 to 8.4 Voltage Range
- Power Support
- VPC Support
- BYPASS Mode
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- 200 to 500 Degrees Fahrenheit
- 0.96 Inch Color Display
- Amp Range
- Output Power
- Atomizer Resistance
- Battery Life Indicator
- Puff Counter
- Neatly Displayed
- Magnetic Battery Panel
- Accepts Dual High Amperage 18650/20700/21700
- Batteries Sold Seperately
- (PPS + Fiberglass) + Stainless Steel Construction
- USB Port
- Update and Charging Capability
- Spring Loaded Gold Plated 510 Connection
- Reverse Polarity Protection/Short Circuit Protection/Low Voltage/Overheat
- 94.4mm by 52.6mm by 38.5mm
- 25mm Diameter
- Quarter Turn Top Fill System
- 4ml Maximum Capacity
- IM Coil Family
- 0.4 ohm
- Vertical Coil
- 40 to 60W
- 0.15 ohm
- Vertical Coil
- 60 to 80W
- Dual Adjustable Bottom Airflow System
- 9mm by 2mm Each Airslot
- Fully Closeable
- One GeekVape Blade Mod
- One Aero Sub-Ohm Tank
- One IM1 0.4 ohm Coil (Pre-installed)
- One IM4 0.15 ohm Coil
- One Spare Silica Glass
- One 18650 Adapter
- One USB Cable
- Spare Parts Pack
- User Manual
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.