GeekVape Bident Portable Pod System
GeekVape presents the Bident, a newly designed pod system for those that desire a simple vaping experience. The GeekVape Bident pod system features a USB charging port, replacement MTL pods designed for salt nicotine, a large 950mAh battery capacity, and an innovative dual coil layout with resistance of 0.5 to 3.0 ohms. This device is easy to use and doesn't sacrifice size or flavor.
The GeekVape Bident remains fairly compact with its overall measurements being 88mm by 32mm by 17mm, and featuring new colors and finishes for a customized look. A sleek and minimalistic design covers this device as the only button found on this device is the on and off switch, which doubles as the firing button. Located around the firing button is an integrated LED which displays battery life and device safety notifications. The LED lights will correspond with the remaining battery life with three colored lights flashing 2 times; At maximum charge to 70%, there will be a green LED, from 69% to 31%, there will be an blue LED, from 30% or lower, there will be a red LED notifying the user to charge the device. Draining this devices battery will be a difficult matter since the battery capacity is a whopping 950mAh integrated battery. Another great upgrade to this device is the utilization of USB-Type C located at the bottom of the device.
Moving forward, the GeekVape Bident Replacement pod securely fits atop the device and protrudes enough for a comfortable draw. This system features a whistle tip styled drip tip and is approximately 20mm wide for a comfortable vaping experience. Juice can be filled through a orange silicone tab located on the bottom of the pod with a maximum juice capacity of 3.5ml. The replacement pods come in two different styles. One of which is the Bident Pod B1 which is a 0.8 ohm N80 coil, best used at 14 to 18W. The other variation of pod is the Bident Pod B2 which is a 1.2 ohm N80 coil, designed to be vaped at 9 to 12W. Both pods deliver smooth and flavorful vapor in every puff. Each pod is securely connected to the device via friction fit connection.
Check out Mike Vapes Video Review HERE!Product Specifications
All-in-One Pod System
- Draw Activated Firing
- 3.8V Maximum Output
- 3.3V to 4.2V Voltage
- Bident Replacement Pod
- 3.5ml E-Liquid Capacity
- Whistle Drip Tip
- Bident B1 0.8 ohm DL Pod
- 0.8 ohm Resistance
- N80 Coil Integration
- Direct Lung
- Bident 1.2 ohm MTL Pod
- 1.2 ohm Resistance
- N80 Coil
- Mouth to Lung
- Silicone Stopper
- Proprietary Connection
- Plug and Play Connection
- Gold Plated Contacts
- Pod Acts as Drip Tip
- 950 mAh Built in Battery
- LED Battery Life Indicator
- Green LED
- Fully Charged to 70%
- Blue LED
- 69% to 31%
- Red LED
- 30% or Below
- USB Type-C Charging
- 88mm by 32mm by 17mm
- One Bident Device
- One Bident 0.8 ohm Pod
- One Bident 1.2 ohm MTL Pod
- One User Manual
- One USB Charging Cable
Check out the GeekVape Bident infographic to help you better understand how it works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.