GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Gold GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Purple GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Blue GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Stainless Steel GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Rainbow GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Gunmetal GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA
GeekVape Rebuildable Black GeekVape Baron 24mm BF RDA

GeekVape Baron 24mm BF RDA

GKVBRN-0001

Regular price $29.99 USD Sale price $12.99 USD Save $17.00 USD
7
Availability: Out of Stock

GeekVape Baron 24mm BF RDA

GeekVape presents the Baron RDA, a 24mm wide bottom feed rebuildable dripping atomizer that features a notched external locking cap and a multifunctional internal airflow system that works seamlessly in unison. The multifunctional internal airflow system can be changed and locked in place whilst the top cap is used as the airflow control system. The build deck of the Baron features dual post single terminal style build deck and has an ample 6mm deep juice well. The Baron also comes with a bottom feed 510 squonk pin that can be interchanged with a regular 510 pin.

The GeekVape Baron 24mm BF RDA is a 24mm rebuildable atomizer that focuses on it's smooth completely versatile internal airflow system. The internal airflow system is secured with a single O-Ring and two pairs of notches that aligns the segment parallel to the coil. The first pair of airflow slots are the four (4) slotted airflow system measures at 5mm by 1.5mm per slot and matches the external locking top cap's slotted airflow. The second set of airflow slots are twelve (12) 1.5mm airflow slot system. The top cap is secured via double O-rings and a wider notch to allow airflow control. The top cap features the same four slots measuring at 5mm by 1.5mm on each side. Located on the top of the atomizer is a proprietary reverse O-Ring 810 Drip Tip and comes with two kinds in the package. The resin 810 drip tip measures at 7mm bore whilst the PEI 810 drip tip measures an 8mm bore. Located on the bottom of the Baron is a gold plated 510 pin that can be interchanged with a bottom feed pin for your squonking needs. The build deck of the Baron is a simple dual post single terminal configuration with ample room for either round wire or clapton wire. Each wire is held down by top mounted flat head screws. The bottom of the build deck features dual 1mm slots for bottom feed functionality, the PEEK insulator, and features a 6mm deep juice well. Included with the Baron RDA are two pairs of cotton, a pair of clapton wires, spare parts bag, and a 510 drip tip adapter.Enjoy the GeekVape Baron 24mm BF RDA with the choice of having the configuration of either a slotted airflow or honeycomb style airflow on either a squonk box mod or any mod at all!


Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.

Product Specifications
  • 24mm Diameter
    • 21.8mm Tall Without Drip Tip
    • 28.8mm Tall With Included Drip Tip
    • Dual Post Single Terminal Style Build Deck
      • Top Mounted Flat Head Screws
      • 2.5mm by 3mm Terminals
      • 6mm Deep Juice Well
      • PEEK Insulator
      • Juice Flow Splitter in Center
    • External Locking Top Cap
      • Slotted Airflow
        • Four 5mm by 1.5mm Air Slots Per Side
      • Domed Internal
      • Notch Secured
        • Wider Notch Lock Space for Airflow Control
    • Multifunctional Internal Airflow System
      • O-Ring and Notched Secured
      • Slotted Configuration
        • Four 5mm by 1.5mm Air Slots Per Side
      • Honeycomb Configuration
        • Twelve 1.5 Air Holes in Honeycomb Configuration
    • Gold Plated 510 Contact
      • Squonk-Ready 510 Pin
    • 304 Stainless Steel
    • 810 Drip Tip
      • 7mm Bore Resin Drip Tip
      • 8mm Bore PEI Drip Tip
    Product Includes
    • One GeekVape Baron RDA
    • One Agleted Cotton Strip
    • One PEI Acrylic 810 Drip Tip
    • One 510 Drip Tip Adapter
      • One Flathead Screwdriver
      • One Hex Key
      • One Pair of Pre-Built Coils
      • Spare Parts and O-Rings
      • One T-Tool
      • User Manual

       

      All orders have a processing time of 24-72 hours

      Please refer to our Domestic Shipping and International Shipping pages for more detailed information. 

      CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.  

      State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation. 

      We can not accept orders to be shipped into Utah per Utah Code §59-14-509.

      We have a 45 day return policy. 

      You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable. 

      Please refer to our Refund Policy page for more detailed information.

      Advanced User Item. Use at Your Own Risk!

      Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

      Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling. 

      CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.

      All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.

      NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

      Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

      VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly. 

      All pictures are based on practicality, copyright reserved.

      Customer Reviews

      4.9 Based on 7 Reviews
      5 ★
      86% 
      6
      4 ★
      14% 
      1
      3 ★
      0% 
      0
      2 ★
      0% 
      0
      1 ★
      0% 
      0
      Customer Photos
      100reviewers would recommend this product Write a Review Ask a Question
      • Reviews
      • Questions

      Thank you for submitting a review!

      Your input is very much appreciated. Share it with your friends so they can enjoy it too!

      • coils
      • flavor
      • juice
      • clouds
      • flavors
      • reviews
      • fact
      • mods
      • VaporDNA
      • Vapes
      CZ
      08/10/2019
      Charles Z.
      United States United States

      My first rda

      Very simple, easy to build in. The coils it came with were some heavy wound stuff, more for a beefy mod. All my mods are under 100 watts so I couldn't really use them. But once I made some quarter ohm coils out of 27g kanthal wire it makes a great atomizer for my 80w geekvape aegis mini. The rainbow finish is super pretty too!

      Charles Z. verified customer review of GeekVape Baron 24mm BF RDA
      CC
      07/02/2019
      Conner C.
      United States United States

      Good but the wicking.

      The rda is amazing and the airflow is perfect for what I need however, you have to build so close to the deck for the cotton not to plug part of the airflow. It’s a little harder to do but once you get it right, it’s phenomenal.

      LR
      06/28/2019
      Luis R.
      United States United States

      What a difference ...

      Wow, what have I been missing? This Baron RDA happens to be my first and I love it! I have a bunch of tanks, all of which are RTA's, but never was interested in dripping/squonk mods. The is pretty cool and it produces MASSIVE hits/clouds/flavor. Luis R.

      J
      06/17/2019
      Justin

      Good flavor and a very good cloud chaser

      Just looking at the container it came in it looked of high quality. I got the purple and in love with it, it came with two drip tips the one showed on the picture and a very nice ultem which I put on the rda. It came with one of the best coils I've seen that comes with an RDA mine were staple coils that we're .16 ohms and worked amazing with my acrohm fush and even better on my Kennedy vindicator the purple didn't match with it but it performed great all in all I would recommend this product any day and geekvape has always made great products for the price

      RM
      05/21/2019
      Richard M.
      United States

      Nice atty

      Good flavor. It's vapes like a Drop dual but smaller. Tight build space but over all a 8/10.

      Richard M. verified customer review of GeekVape Baron 24mm BF RDA