Footoon Aqua Master 24mm RTA V2
Footoon presents the Aqua Master 24mm RTA V2, a rebuildable tank with options to be used in Direct Lung configuration or Mouth to Lung configuration. This beautifully crafted RTA caters to all users with its single coil build deck and unique adjustable airflow system. The Aqua Master V2 is constructed from stainless steel with a 2ml Pyrex glass tank section and an optional 4.5ml Pyrex glass bubble tank section.
At the core of the Aqua Master RTA V2 is a very unique two post, single coil build deck. The unique feature of this build deck is the three airflow channels, controlled by a single airflow control ring, which can be set up for MTL or DL style of vaping depending on which setting the AFC is on. The first setting on the AFC is fully closed and all three airflow channels will remain closed to help prevent any leaking when not in use. The second AFC setting opens two 1mm air holes positioned beneath the coil, with the other two airflow channels remaining closed, for MTL style of vaping. This setting paired with 0.8 to 1.2 ohm coil allows the Aqua Master V2 to work at a lower wattage range in conjunction with Salt Nic E-Liquid. The third AFC setting opens an oblong 7mm by 2mm bottom air hole positioned at the front of the coil for a more restricted DL style of vaping. The fourth AFC setting is wide open and opens the two airflow channels from the previous settings, as well as a third 3mm air hole positioned behind the coil for builds requiring maximum airflow. Each of these setting can be fine tuned to the user's preference by setting the AFC between each settings tick mark, located on the AFC.
Footoon designed the Aqua Master RTA V2 to be versatile and allow the user to choose which style of vaping to use it for. When used in MTL mode it is recommended to use the included 5mm bore delrin drip tip, the 2ml tank section, a higher ohm coil, and the first AFC setting. For DL mode one would use the included 8mm bore resin drip tip, the larger 4.5ml tank section, a sub-ohm coil (Footoon recommends fused clapton coil), and the third or fourth AFC setting. The Aqua Master RTA V2 is available in Black, SS, Blue, and Sand Blasted SS.
Check out the Suck My Mod - Aqua Master RTA V2 Video Review HERE!Product Specifications
- 24mm Diameter
- Threaded Top Fill System
- Two Large Fill Ports
- 2ml Glass Section
- 4.5ml Bubble Glass Section Included
- Two Post Build Deck
- Single Coil
- Top Mounted Allen Screws
- 2mm Diameter Terminals
- 6mm by 3mm Wick Holes
- Selective Air Control System
- Four Position Indicator Marks
- Position One
- Fully Closed
- Position Two
- Two 1mm Air Holes Open
- Air Holes Positioned Beneath Coil
- Other Two Air Channels Closed
- Position Three
- One 7mm by 2mm Air Hole Open
- Air Hole Positioned In Front of Coil From Bottom
- Other Two Air Channels Closed
- Position Four
- Fully Open
- One 3mm Air Hole Open
- Air Hole Positioned Behind Coil
- Other Two Air Channels Opened
- 8mm Bore Acrylic Resin Drip Tip
- 5mm Bore Delrin Drip Tip Included
- Stainless Steel and Glass Construction
- PEEK Insulators
- Gold Plated 510 Pin
- One Footoon Aqua Master RTA V2
- One 4.5ml Bubble Glass Section
- One 5mm Bore Delrin Drip Tip
- One T Tool Screwdriver
- Spare Parts Bag
Check out the Footoon Aqua Master RTA V2 infographic to help you better understand how it works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.