Eleaf Saurobox 235W TC Starter Kit
Eleaf presents the Saurobox 220W TC Box Mod and Ello Duro Sub-Ohm Tank Starter Kit, a 220W box mod with a resin material body, full temperature control, and paired with the excellent Ello Duro Sub-Ohm Tank. The Eleaf Saurobox 220W TC Box Mod utilizes a clean 0.96 inch TFT screen that sits on the side of the device and indicates temperature mod and output, wattage output, voltage output, coil resistance, and dual battery life indicators. The Saurobox is operated by a three button interface, and has 2A quick charging capability via micro USB port. The Saurobox uses a battery balancing trickle charge system that charges both batteries up to equal levels. Powering the Saurobox are dual high amperage 18650 batteries (batteries sold separately) and are housed through a magnetic resin door panel. Eleaf pairs the Saurobox 220W TC Box Mod with the ELLO Duro Sub-Ohm Tank, a 25mm base diameter sub-ohm tank that can accommodate 6.5ml of E-Liquid with the bubble glass tank section and 2ml with the standard glass section. The ELLO Duro utilizes the HW series replacement coils but comes with the HW-N 0.2 ohm mesh coil head, rated at 40 to 90W and best at 65 to 75W, along with the HW-M 0.15 ohm mesh coil head, rated at 50 to 100W and best at 70 to 80W. Retaining a small form factor that is comfortable to hold, with the capability of charging 18650 batteries, a luxurious resin design, and the new ELLO Duro Sub-Ohm Tank, the Saurobox 220W TC Starter Kit is perfect for those who enjoy portable yet powerful devices!
- 1.3 to 220W
- 0.05 to 3.0 ohm Atomizer Resistance Range
- 0.5 to 8V Output Voltage
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- TCR (M1, M2, M3)
- 0.05 to 1.5 ohm Atomizer Resistance Range
- 0.96 Inch TFT Screen
- Temperature Mode and Output
- Output Power
- Atomizer Resistance
- Battery Life Indicator
- Output Voltage
- Dual Battery Life Indicator
- Three Button Control Interface
- Over Sized Firing Button
- Adjustment Buttons Located on the Bottom
- Bottom Latch Battery Access Door
- Accepts Dual High Amperage 18650 Batteries
- Batteries Sold Separately
- Micro USB Charging Port
- 2A Quick Charge
- Battery Balancing Trickle Charge System
- Firmware Upgradeable
- 2A Quick Charge
- Stainless Steel 510 Threading
- Accommodates Up to 26mm Atomizer Diameter
- Gold Plated Contact
- Overcharge Protection/Over Current Protection/ Over-Discharge Protection/Reverse Polarity Protection
- 25mm Diameter
- 6.5ml Tank Capacity
- 2ml Standard Glass Capacity
- Push Top Fill System
- O-Ring Sealed
- O-Ring Sealed
- HW Coil Family
- HW-N 0.2 ohm Coil
- 50 to 130W
- Net Coil
- HW-M 0.15 ohm Coil
- 50 to 100W
- Multihole Coil System
- HW-N 0.2 ohm Coil
- Triple Adjustable Bottom Airflow
- 11mm by 4mm Each Airslot
- 14mm Bore 810 Drip Tip
- One Eleaf Saurobox 220W TC Box Mod
- One ELLO Duro Sub-Ohm Tank
- One HW-N 0.2 ohm Coil Head
- One HW-M 0.15 ohm Coil Head
- One QC USB Cable
- One Spare Parts Bag
- Two User Manual
- Shipping and Returns
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.