Eleaf Pico S 21700 100W TC with ELLO VATE Starter Kit
Eleaf features the iStick Pico S, now available with a more up-to-date chip with the capability of utilizing a single 21700 or 18650 battery (sold separately) while retaining the form-factor we all know and love. The Pico S 21700 utilizes a crisp 0.91 inch OLED screen that sits on the side of the device and indicates the essential information Vapors need to see. The Pico S also features customizable RGB lights with 7 colors to choose from; red, green, blue, cyan, white, yellow, and purple. The Pico S is operated by a three button interface, and has 2A quick charging capability via micro USB port. The single high-amperage 21700 or 18650 (batteries sold separately) is housed through a threaded battery tube located on the side of the device and features a corroded texture. Eleaf pairs the Pico S 21700 with the ELLO VATE Sub-Ohm Tank, a 26.5mm base diameter sub-ohm tank that can accommodate 4ml of E-Liquid. The ELLO VATE utilizes the HW series coils but comes with the HW-N 0.2 ohm mesh coil head, rated at 40 to 90W and best at 65 to 75W, along with the HW-M 0.15 ohm mesh coil head, rated at 50 to 100W and best at 70 to 80W. Retaining a small form factor that is comfortable to hold, with the capability of using either a 18650 or 21700 battery and the new ELLO VATE Sub-Ohm Tank, the iStick Pico S 21700 TC Starter Kit is perfect for those who enjoy portable yet powerful devices!
- 1 to 100W
- 0.05 to 3.0 ohm Atomizer Resistance Range
- 0.5 to 9V Output Voltage
- Bypass Mode
- Output Based on Resistance and Battery State
- On and Off Capable
- 0.05 to 3.0 ohm Atomizer Resistance Range
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- TCR (M1, M2, M3)
- 0.05 to 1.5 ohm Atomizer Resistance Range
- Threaded Battery Tube
- Corroded Texture
- Fits a Single 21700 or 18650
- 18650 and 21700 Batteries Sold Separately
- 0.91 Inch OLED Screen
- Temperature Mode and Output
- Output Power
- Atomizer Resistance
- Battery Life Indicator
- Output Voltage
- Stealth Mode
- 7-Color LED Light
- Three Button Control Interface
- Over Sized Firing Button
- Adjustment Buttons Located on the Bottom
- Micro USB Charging Port
- 2A Quick Charge
- Firmware Upgradeable
- Stainless Steel 510 Threading
- Accommodates Up to 26.5mm Atomizer Diameter
- Gold Plated Contact
- Overcharge Protection/Over Current Protection/ Over-Discharge Protection/Reverse Polarity Protection
26.5mm Base Diameter
- 28mm with Bubble Glass Tank Section
- Sliding Top Fill System
- Slides Open and Shut
- Fill Port
- 6.5ml Max Capacity
- Eleaf HW Coil Family
- 0.2 ohm
- Kanthal Mesh Coil
- 40 to 90W
- Best at 65 to 75W
- 0.15 ohm
- Kanthal Mesh Coil
- 50 to 100W
- Best at 70 to 80W
- Dual Adjustable 14mm by 2mm Airslots
- Proprietary 13.5mm 810 Wide Bore Resin Drip Tip
- Stainless Steel and Glass Construction
- One Eleaf iStick Pico S Box Mod
- One ELLO VATE Sub-Ohm Tank
- One HW-N 0.2 ohm Coil Head
- One HW-M 0.15 ohm Coil Head
- One QC USB Cable
- One Spare Parts Bag
- Two User Manual
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.