Eleaf iStick Mix 160W Vape Mod and Kit
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
Eleaf presents their newest mix to the iStick Family; the iStick Mix and vape box mod the ELLO POP Sub-Ohm Tank. Form fitting and appealing with resin and artistic design, the iStick Mix features exchangeable resin panels that matches the drip tip of the new ELLO POP. Another matching feature between the iStick Mix and the ELLO POP is the unique utilization of silicone rings on the bubble glass tank section. Together or by themselves, the iStick Mix and ELLO POP is surely something that every Vapers should look out for.
Starting off with the iStick Mix, this device features curved designs with both panels featuring amazing designs. This curved design allows for a more comfortable grip when vaping this device. On the side, the oversized firing button, OLED screen, and adjustment buttons are laid out horizontally. This configuration allows users to easily navigate their device with one hand. For a more comfortable view, the OLED screen measures at 1.3 inches, allowing Vapers to view essential data clearly. Each data viewed stems from the Stable Avatar Chipset; This chipset allows the iStick Mix to go from 1 to 160W, regulating an atomizer resistance to 0.05 to 3.0 ohm, and a full temperature control suite. In addition, the Stable Avatar Chipset presents multiple protections ranging from over-charge, over-discharge, over-current, short circuit, reverse polarity protection, and preventing the device from firing for over 10 seconds. This device requires dual high amperage 18650 batteries to operate (sold separately), each housed behind the magnetic resin panel and can be charged directly through the USB type-c for an added convenience.
Included with in the Starter Kit is the newest ELLO POP Sub-Ohm Tank. This unique sub-ohm tank feature silicone rings wrapped against the bubble glass, adding protection from accidental hits or drops. The base of the ELLO POP measures at 26.5mm however, the bubble glass extends the maximum diameter to 28mm. With this expansion, the ELLO POP can accommodate a whopping 6.5ml of e-liquid from 2ml. A unique child proof lock has been implemented on the ELLO POP, users are now required to slightly pull the top of the tank up and push forward, thus exposing the large fill port. Airflow enters this Sub-Ohm Tank through dual large airflow slots, each measuring at 14mm by 3mm, and each being able to be adjusted fully. Internally, the ELLO POP utilizes the well known HW coil family. Included are the HW-M2 and the HW-N2; The HW-N2 a 0.2 ohm coil head that utilizes a net style coil configuration with a 40 to 90W output setting. The HW-M2 shares the same 0.2 ohm rating however the mesh coil has the standard multi-hole configuration, while retaining the 40 to 90W output setting.
The iStick Mix by Eleaf is an amazing device for starters, especially if it is paired with the ELLO POP Sub-Ohm Tank. Both work unanimously without drawbacks.
- Stable Avatar Chipset
- 1 to 160W
- 0.05 to 3.0 ohm Atomizer Resistance Range
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- TCR (M1, M2, M3)
- 0.05 to 1.5 ohm Atomizer Resistance Range
- 1.3 Inch OLED Screen
- Temperature Mode and Output
- Output Power
- Atomizer Resistance
- Battery Life Indicator
- Output Voltage
- Three Button Control Interface
- Oversized Firing Button
- Adjustment Buttons Located on the Bottom
- Magnetic Battery Door Access Door
- Accepts Dual High Amperage 18650 Batteries
- Batteries Sold Separately
- USB Type-C Charging Port
- Firmware Upgradeable
- Stainless Steel 510 Threading
- Accommodates Up to 26mm Atomizer Diameter
- Gold Plated Contact
- Overcharge Protection/Over Current Protection/ Over-Discharge Protection/Reverse Polarity Protection
- 26.5mm Base Diameter
- 28mm With Bubble Glass
- 6.5ml Tank Capacity
- 2ml Standard Glass Capacity
- Silicone Ring Protectors On Glass
- Pull Up and Push Fill System
- O-Ring Sealed
- O-Ring Sealed
- HW Coil Family
- 0.2 ohm
- 40 to 90W
- Net Coil
- 0.2 ohm
- 40 to 90W
- Multihole Coil System
- Dual Adjustable Bottom Airflow
- 14mm by 3mm Each Airslot
- 8mm Wide Bore 810 Drip Tip
- One Eleaf iStick Mix
- One ELLO Pop Sub-Ohm Tank
- One Spare 6.5ml Bubble Tank
- Non-Silicon Ring
- One HW-M2 0.2 ohm Coil Head
- One HW-N2 0.2 ohm Coil Head
- One QC3.0 USB Cable
- Spare Parts Bag
- Two User Manuals
Check out the Eleaf iStick Mix infographic to help you better understanding how the product works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.