Dovpo VEE 1.0-8.0V Variable Voltage Box Mod
Dovpo introduces the VEE Box Mod, a variable voltage box mod capable of 1.0V to 8.0V and powered by dual high amperage 18650 battery. The VEE has a 6.4 to 8.4V working voltage with a 0.05 to 3.5 ohm atomizer range and can fire from 1.0V to 8.0V. The VEE Box Mod features a four button control interface with the regular adjustment buttons, an oversized firing button which is located on the battery door, and an off and on switch. The 0.96 inch OLED screen neatly displays only the voltage while an LED battery indicator sits atop the screen. Dual high amperage 18650 batteries (sold separately) are housed under the VEE through a bottom latch door. With its high power capability and ergonomic shape, the VEE Box Mod is an ideal device to have. Please refer to the user manual for Settings Recommendation.
Dovpo VEE Box Mod
- Variable Voltage Proprietary Chip
- 1.0 to 8.0 Output Voltage
- 0.05 to 3.5 ohm
- .96 inch OLED Screen
- Output Voltage
- Bottom Latch Battery Access Door
- High Amperage 18650 Battery Operation
- Sold Seperately
- Battery Life Indicator
- 6.9 V to 7.4V
- 6.9 V or Lower
- Four Button Control Face
- Oversized Firing Button
- Adjustment Buttons
- One and Off Switch
- Zinc Alloy Construction
- Gold Plated 510 Threading and Firing Pin
- Spring Loaded Connection
- Battery Reversal Protection/ Short Circuit Protection/ Open Circuit Warning/ Overtime Protection/ Low Voltage Protection/ Over-temperature Protection
- 87mm by 47.5mm by 29.5mm
- One Dovpo VEE Box Mod
- One USB Cable
- User Manual and Warning Card
- Shipping and Returns
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.