CoilArt Mage 25mm RTA 2019 Edition
The Mage RTA 2019 Edition can be broken down into four main segments. The top cap, glass tube, internal barrel, and atomizer base. The top cap consists of the a 810 resin drip tip with a color based on the atomizer selection, has a 21mm diameter silicone ring, and can be removed from the internal barrel with a quarter turn twist. The CoilArt Mage 2019 Edition comes with two convex 4.5ml glass tubes that are 28mm in diameter, eliminating any part of the glass from protruding beyond the diameter of the tank, while still expanding e liquid capacity. The internal barrel has a stainless steel construction and a domed shape to prevent e juice build up and has two large 9mm by 2mm top fill ports. The internal barrel's threading allows the user to control juice flow by reducing the size of the 9mm by 3.5mm external wicking ports. The Mage 2019 Edition has four 1.5mm deep and 2.5mm wide terminal post-less build deck secured with side mounted Flathead screws and accommodates both single coil and dual coil set ups. The positive terminals are separated with PEEK insulation. The internal wicking ports measure in a 10mm by 4mm each. The base of the build deck features twenty 1.4mm air ports in a cross pattern. This airflow leads to two fully adjustable 17mm by 3mm air slots that can be fully adjusted to the user's preference. The resin airflow adjustment ring's rotation is limited by a notch next to the air slot. The base of the CoilArt Mage RTA features a 510 threaded connection. The gold plated contact point is threaded and has a Flathead notch allowing it to be removed. This connection has a PEEK insulated cap that may fall when the contact point is removed. Overall, the CoilArt Mage RTA 2019 Edition is an upgraded version of the Mage V2 with increased airflow and improved design and is not your typical cheap rebuildable tank atomizer.
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
CoilArt Mage RTA 2019 Edition
25mm Stainless Steel Base Diameter
- 28mm Widest Diameter
- 55mm Overall Height
- 4.5ml Tank Capacity
- High Capacity Tank Reservoir
- Quarter Twist Threaded Top Fill
- Smooth Top Cap
- Two Large 9mm by 2mm Fill Ports
- Stainless Steel Plated Stainless Steel Postless Build Deck
- Dual Coil Postless Build Deck
- Four Terminal
- Side Mounted Flathead Screws
- 1.5mm by 2.5mm Each Terminal
- Dual Wicking Ports
- 10mm by 4mm Build Deck Wicking Ports
- 9mm by 3.5mm External Wicking Port
- 20 x 1.4mm Honey Comb Airholes Surrounding Terminals
- PEEK Insulation
- Four Terminal
- Dual Coil Postless Build Deck
- Dual Adjustable Bottom Airslots
- 17mm by 3mm Each Airslot
- Fully Closeable
- 13mm Bore Tapered Resin 810 Drip Tip
- 304 Stainless Steel and Glass Construction
- Gold Plated 510 Contact
- 55mm by 28mm
- One CoilArt Mage RTA 2019 Edition
- One 4.5ml Glass Tank Section (Pre-Installed)
- One Spare 4.5ml Glass Tank Section
- One 13mm Wide Tapered 810 Resin Drip Tip
- Two Spare O-Rings
- Four Spare Side Mounted Flathead Screws
- One Flathead Screwdriver
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.