Augvape Occula 24mm BF RDA
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
Augvape and Twisted Messes come together to create the Occula, a beautifully machined rebuildable dripping atomizer. This RDA comes with a unique and innovative internal-post clamp design along with bottom feeding capabilities. Another advantage the Occula yields is the ability for users to use dual or single coils when building.
Constructed beautifully, the Occula features a seamless design from the drip tip to the base. The Occula's drip tip measures at 10mm and features a wide bore design for amazing airflow. A knurled top cap is present to allow smooth airflow adjustments from the triple downward airflow slots. In addition, the Airflow control ring is equipped with a half and quarter blocker to allow usage of single or dual coils. This triple downward airflow slots allow intake directly to the coils installed and measures at 3mm by 2.5mm each side. Located on the bottom of the Occula are beautifully CNC'd logos and the 510 gold plated pin. This 510 pin can be easily swapped out with the included bottom feed pin to make it squonk ready.
Moving onto the build deck, Twisted Messes and Augvape implemented an innovative internal-post clamp design. This large format build posts measures at 6mm by 2.5mm each terminal, allowing users to use their preferred flat coil or round coils. Each coils are held down by large M3 coils that can accommodate both Flathead or Phillips screwdrivers. Located around the build deck is a whopping 5mm e-liquid reservoir, perfect for those using the Occula as a bottom feed atomizer. Stabilizing the deck to the top cap chamber can be done by aligning each notch, this in turn allows the top cap's airflow to stay within the parameters of the coils.
Augvape and Twisted Messes has outdone themselves with the Occula; This beautifully crafted atomizer works amazingly with any paired box mod, non-squankable or squankable alike.
Ohm Boy OC Reviews the Occula RDA Here!
RiP Trippers Reviews the Occula RDA Here!
- 24mm Diameter
- Dual Post Single Large Format Terminal Build Deck
- 6mm by 2.5mm Per Terminal
- Top Mounted M3 Screws
- 5mm Deep Juice Well
- PEEK Insulator
- Dual Airflow System
- Triple Downward Airflow Slots Each Side
- 3mm by 2.5mm Each Airslot
- Fully Adjustable
- Single Coil or Dual Coil Compatible
- Gold Plated 510 Contact
- Bottom Feed 510 Pin Included
- 304 Stainless Steel
- 810 Drip Tip
- 10mm Wide Bore Drip Tip
- One Augvape Occula RDA
- One Bottom Feeding Pin
- One Hex Allen Key
- Spare Parts Bag
- One Introduction Card
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.