Aspire Tigon Vape Pen
Aspire presents the Tigon Vape Pen, a pen style vape built for tight air draw and amazing flavor production. The Tigon Vape Tank utilizes a direct lung and mouth to lung coil with a self sealing tank and child-locked top filled system.
The Aspire Tigon's pen style vape battery is 23mm wide and 142mm tall. This vape has a battery dependent bypass output with a range of 3.3 to 4.2V and has a capacity of 2600mAh with a 2A charge rate. The single firing button has an LED charging indicator that glows pink for 3.8V or more, blue for 3.5 to 3.8V, and red for 3.5V or less. This indicator will also flash pink once to show when the device begins charging and flash 20 times when the device has been fully charged. This mod comes with automatic cut-off protection, short circuit protection, low voltage protection, over-charge protection, and over-heat protection. The Tigon starter kit comes with the Tigon vape tank, a 3.5ml capacity atomizer with a child locked, pull top, slide to open filling system. This tank is 23mm at its base, 24.5mm at its widest point, and is 47mm tall. It uses the Tigon Nichrome replacement coils: a 0.4ohm DL coil best at 23 to 28W, and the 1.2ohm MTL coil best at 10 to 12W. These replacement coils have a threadless push fit style that complements that Tigon's spring loaded e-liquid chamber seal. This allows the user to remove the coil head while keeping e-liquid within the reservoir. Airflow goes through a single 8mm by 1.5mm internal airslot or five 1mm MTL airslots. Vapers can adjust the airflow with the bottom adjustment ring with a single 8mm by 1.5mm airslot. The Tigon comes with a 9mm wide stubby 510 bore Delrin drip rip and a 4mm wide 510 bore Delrin drip tip. This kit has a matching 510 threaded gold plated contact points. The Aspire Tigon is an excellent MTL starter kit with the flexibility to be used as a tight bore direct lung vape that provides spectacular flavor.
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
Check our RiPTripper's review of this product here!
- 23mm Diameter
- 142mm Tall
- Single Firing Button
- Bypass Mode
- Output Dependent on Current State of Battery
- 3.3 to 4.2V Output
- Built In 2600mAh Battery
- Micro USB Charging
- 2A Charging
- LED Charging Indicator
- Charging Battery Life
- 20 Pink LED Blinks
- Fully Charge
- 3.8V or More
- Pink Light
- 3.5V to 3.8V
- Blue Light
- 3.5V or Less
- Red Light
- Lights Up Around Firing Button
- Charging Battery Life
- Stainless Steel 510 Thread Point
- 24K Gold Plated Spring Loaded Connection
- Automatic Cut-Off/Short Circuit Protection/Low Voltage Protection/Overcharge Protection/Over-heat Protection
- 88mm by 82.5mm
- 23mm Diameter
- 24.5mm Widest Diameter
- 47mm Widest Point
- 3.5ml Tank Capacity
- Push Top Fill System
- Lift to Unlock Childproofing
- Tigon Replacement Coils
- 0.4ohm DL Coil
- 23 to 28W
- Nichrome Wire
- Push Fit Coil
- 1.2ohm MTL Coil
- 10 to 12W
- Nichrome Wire
- Push Fit Coil
- Push Fit Coil Chamber
- Spring Loaded E-Liquid Chamber Seal
- Single Adjustable Bottom Airflow
- 8mm by 1.5mm External Airslot
- 8mm by 1.5mm Internal Airslot
- Five 1mm MTL Airslots
- 9mm Wide Short 510 Delrin Drip Tip
- 4mm Wide Tall 510 Delrin Drip Tip
- 510 Threaded Gold Plated Contact Point
- One Tigon Battery
- One Tigon Sub-Ohm Tank
- Two 510 Delrin Drip Tips
- One 0.4ohm DL Tigon Coil
- One 1.2ohm MTL Tigon Coil
- One Spare Parts Pack
- One USB Cable
- One User Manual
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.