Aspire Feedlink Revvo BF Starter Kit
Aspire presents the Feedlink Revvo BF Starter Kit, a single 18650 battery powered
Purchase Replacement ARC Coils Here!
- 3.0 to 4.2V Output
- Bottom Feed Bottle
- 7ml Maximum Capacity
- Screw-In Cylinder Casing
- Single 18650 Battery Powered
- Screw-In Cap Door
- Battery Sold Separately
- Single Button Control Face
- Oversized Firing Button
- Press Five Times to Lock/Unlock
- LED Will Flash Orange and Blue Three Times
- LED Light Indicator
- Under the Fire Button
- LED Will Glow to Indicate Battery Life When Pressed
- Above 3.8V
- Blue and Orange
- Between 3.8V to 3.5V
- Below 3.5V
- Safety Features
- Automatic Firing Cutoff
- 10 Second Maximum Fire Time
- Short Circuit Protection
- Over Discharge Protection
- Over Heat Protection
- Automatic Firing Cutoff
- Ergonomic Device Body Design
- 24mm Diameter
- Stainless Steel Protective Glass Sleeve
- Bottom Fill Squonk Pin
- 2ml Tank Capacity
- Triple Top Adjustable Airflow
- 10.5mm by 2.5mm Each Airslot
- Fully Closeable
- ARC (Aspire Radial Coil) Coil Family
- Horizontal Orientation
- 0.10 to 0.14 ohm
- 70 to 80W Wattage Range
- Kanthal AF Wire
- Organic Cotton
- Wide Bore Delrin Drip Cap
- Drip Tip Acts as Drip Cap
- 12mm Wide Bore
- Stainless Steel, Plastic, and Glass Construction
Feedlink Squonk Mod
- 87mm by 48mm by 30mm
- Revvo Boost BF Tank
- 24mm by 41mm
- One Feedlink Squonk Mod
- One Revvo Boost Tank
- Two Arc Coils Replacement Coils
- 0.10 to 0.14 ohm
- One Spare Glass Tube
- Eleven O-rings
- User Manual, Warning Card, and Warranty Card
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.