Ambition Mods Purity 18mm MTL RTA
Ambition Mods presents the Purity Rebuildable Tank Atomizer, a compact single coil mouth to lung RTA. The Purity RTA features a dual post single terminal build deck and dual adjustable airflow slots located at the bottom of the RTA which siphons air up through the bottom of the build deck. With a stainless steel finish users can match their mods perfectly. For user customization, an added juice flow control ring is provided which helps create the perfect vaping experience.
Diving more in depth with the Purity, this rebuildable tank atomizer measures at 18mm in base diameter, accommodating most, if not a vast percentage of vape mods on the market. E-liquid can be poured into the Purity RTA through a removable top ring. Once that ring is unscrewed users may remove the top fill juice flow plug and drip tip housing to fill accordingly. This tank atomizer can accommodate a maximum of 2ml with the pre-installed straight glass tank section. Airflow enters the RTA through dual adjustable airflow slots located on the base of the RTA. This portion of this airflow control ring features a fully open port, which can be tapered down to a 0.5mm airflow hole.
Internally, the Purity RTA features the a two post single terminal build deck that features an adjustable juice flow control system. Each terminal measures at 4mm in diameter and can accommodate a single coil build configuration. As an added feature for ease of use, lead collars are available for users to wrap their coils around each post in order to prevent the coil from shorting. Each corner end of the build deck features a cutout for cotton to tightly fit in. In the center of the build deck is a single airflow slot (measuring at 1.8mm in diameter) which directly brings airflow to the coil, delivering accurate flavor on each puff.
All in all the Purity 18mm MTL RTA by Ambition Mods is an prime example of a well done mouth to lung RTA, its a must have for those looking for simple builds and maximum flavor.Product Specifications
- 18mm Diameter
- 2ml Tank Capacity
- High Capacity Tank Reservoir
- Easy Unscrew Top Fill Design
- Two Large Fill Ports
- Two Post Build Deck
- Single Coil Design
- Single Terminal
- Top Mounted Philips Screws
- 4mm Diameter Each Terminal
- Side Wicking Cutouts
- PEEK Insulation
- Single Terminal
- Single Bottom Airflow
- Directly Hits Coil
- 1.8mm Diameter
- Single Coil Design
- Dual Adjustable Bottom Air Slot
- Four Tapered Airholes
- Fully Closeable
- 5mm Wide Bore Delrin Drip Tip
- 304 Stainless Steel and Glass Construction
- 510 Contact
- One Purity MTL RTA
- One Spare Glass Section
- One Keychain Multitool
- One Spare Parts Bag
- One User Manual
Check out the Purity RTA infographic to help you better understand how the product works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.