Wotofo x Mr.JustRight1 x TVC Profile Unity 24mm RTA
Wotofo has collaborated with Mr.JustRight1 and The Vaping Chronicle to bring the future of rebuildable tank atomizers, the Profile Unity 25mm RTA. Retaining its minimalist design and feature-packed in engineering, the Profile Unity produces genre defining flavor with a user friendly building experience.
The Profile Unity retains the build deck form factor of it's RDA version; featuring a dual clamp, mesh coil compatible build deck, and a spring loaded central ceramic support platform. Wotofo Profile Unity's design incorporates a wide clamp style, dual post build deck that accommodates a wide variety mesh style coil sheets. Two side-mounted Phillips screws allow for easy and secure installation. Mesh strips can be also be perfectly shaped to fit the Profile Unity's build deck using the included mesh bending tool. This package comes with the nexMesh, 16mm by 6.8mm sheets that have an atomizer resistance of 0.13 ohm, and a recommended wattage of 60 to 70W. The nexMESH by OFRF has been widely acclaimed and used with the Profile RDA; Designed specifically for the Profile RDA with the industry's finest micro-weave design that delivers unreal flavor and vapor production, is now available right off the package with the Profile Unity RTA.
Aiming to solve the cotton wicking issue commonly found with mesh RDA's, the Profile Unity utilizes the use of a spring loaded ceramic support deck. The ceramic platform applies constant pressure to the cotton, ensuring that it is always in contact with the mesh strip. The 24K gold plated bottom feed pin also directly sends
Externally the Wotofo Profile Unity has three unique sections: a vaporization chamber with steeped airflow, a tongue and groove top cap, and a changeable glass tank section. The vaporization chamber has a unique deck-chamber linkage system and an ingenious bi-level juice port structure. The body has two notches that align with the base of the atomizer that secures the top cap in place and ensures proper airflow alignment. The Wotofo Profile Unity can accommodate either 3.5ml or 5ml of e-liquid. Users must use the included chamber adapter to be able to use the 5ml glass tank section. This package comes with a pre-installed 9mm bore 810 wide thick
- 25mm Diameter
- Threaded Top Fill System
- Two Large Fill Ports
- 3.5ml Standard Capacity
- 5ml Maximum Capacity
- Two Large Fill Ports
Wide Clamp Style Dual Post Build Deck
- 7mm by 2mm Each Terminal
- Side Mounted Phillips Screws
- German PEEK Insulated Positive Post
- Spring Loaded Central Ceramic Support
- 7mm by 2mm Each Terminal
- Dual Adjustable Center Airslot
- Stainless Steel and Glass Construction
- One Wotofo Profile Unity RTA
- Two nexMesh 0.13 ohm Coils
- One 6mm Agleted Cotton
- One 5ml Glass Tube
- One 5ml Tube Adapter
- One User Manual
- One Bending Tool
- One Screwdriver
- Spare Parts Bag
Check out the Profile Unity infographic to help you better understanding how the product works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.