Psyclone Mods x SUSCo PSYC Bridge
VaporDNA Vaper's Choice: Best Boro Bridge For DL
Psyclone Mods x SUSCo present the PSYC Bridge, a rebuildable bridge for boro tanks and devices. The PSYC Bridge features the CITADEL RDA's build deck, four sizes of airflow pin options, and two chimney styles with different bore sizes. The PSYC Bridge can be configured to be used for MTL, RDL, and even DL styles of vaping, but is recommended for use with larger diameter coils. The PSYC Bridge is compatible with Boro tanks that accept Boro Bridges, including the Abyss AIO.
The single coil build deck of the PSYC Bridge features a two post, four terminal, setup that can accomodate left hand wrapped coils and right hand wrapped coils. Each terminal features wide openings to accomodate majority of wire formats, and a small grub screw that can be loosened and tightened with the included hex wrench. Perpendicular to the posts are two wicking channels for positioning your wicks. The base of the PSYC Bridge is 510 threaded, eliminating the need for an adapter to build and pre-fire your coil.
The PSYCH Bridge chamber features a spacious interior that leaves room for larger diameter coils, with side cutouts for wick placement. You may need to use different wicking methods depending on your build and diameter of the coil used. Psyclone Mods included two different chimney styles with different bore diameters: a twisted chimney with a 3mm bore, and a spiral fluted chimney with a 4.5mm bore. Airflow enters the PSYCH Bridge from the bottom through the center pin, which can be swapped out to one of the four airflow pin options: 1.2mm, 1.8mm, 2.5mm, or 3mm.
Pro Tip: Be careful with the small grub screws when tightening them down. Do not over tighten as they can strip. If slipping begins, replace with a new screw included in the parts pack. You may need to play with the wicking method to achieve optimal wicking. In our experience, it works best to leave the wicks long and cut them flush with the chimney cap. The 510 threads built into the bottom of the PSYC are shallow. A mod with a 510 threaded to the top is needed to secure the bridge when building, if pre-firing the coil is required.
- 1 x PSYC Bridge
- 1 x 3mm Chimney (Twisted)
- 1 x 4.5mm Chimney (Spiral Flutes)
- 4 x Airflow Pins
- 1 x ODB x Psyclone Mods 18650 Battery Wrap