Are you of legal age at your area to purchase vaping products?
You are too young to view this website.
Wotofo x Mr.JustRight1 Profile 1.5 24mm BF RDA
Wotofo x Mr.JustRight1 introduces the Profile 1.5 24mm BF RDA. This new version of the Profile shares the same minimalist design, yet incorporates new mesh strips, bottom feed capabilities and a improved build deck. The Profile 1.5 simplifies the building process through the use of pre-cut mesh strips and contains the newest versions of nexMesh for a flawless flavor oriented vaping experience.
The Profile 1.5 features a dual clamp, mesh coil compatible build deck, perforated top cap airflow, and a spring loaded central ceramic support platform. Wotofo Profile's design incorporates a wide clamp style, dual post build deck that accommodates both mesh style coil sheets and regular performance coils. Two side-mounted Phillips screws allow for easy and secure installation. This package comes with three different nexMesh Wotofo Mesh Style Coils, 17mm by 8.5mm sheets that have various atomizer resistances, and a recommended wattage of 60 to 80W. Wotofo has introduced the newest nexMESH, mesh strips designed specifically for the Profile 1.5 RDA with the industry's finest micro-weave design that delivers unreal flavor and vapor production. Mesh strips can be perfectly shaped to fit the Profile's build deck using the included mesh bending tool. The Profile 1.5 aims to solve the cotton wicking issue commonly found with mesh RDA's, through the use of a spring loaded ceramic support deck. The ceramic platform applies constant pressure to the cotton, ensuring that it is always in contact with the mesh strip. The 24K gold plated bottom feed pin also directly sends
Wotofo Profile 1.5 features a two piece top cap: an airflow adjustment upper segment and a body with perforated airflow holes. Its upper segment has a dual step airflow adjustment design that can be rotated to suit the user's needs. Whether wide open or fully closed off the adjustment ring smoothly operates with a single o-ring. The main body has ten 1.5mm air holes per side, aligned with the deck to provide ample airflow. The body has two notches that align with the base of the atomizer that secures the top cap in place and ensures proper airflow alignment. In line with the the Profile's minimalist design, the logo is laser etched on the straight body of the top cap. The Wotofo Profile 1.5 has a 5mm deep juice well. This package comes with a pre-installed 10mm bore 810 wide
Check out Mike Vapes Video Review HERE!Product Specifications
Check out the Wotofo Profile 1.5 RDA infographic to help you better understanding how the product works!
All orders have a processing time of 24-72 hours
CALIFORNIA ORDERS: Per California's STAKE Act, we are required to contact customers that place orders to be shipped to California. Customer's will be contacted by telephone with our automated telephone service to confirm your purchase. These calls will occur after 5pm PST.
State Regulations: Some states have specific laws regarding the sale and shipments of our products. If you do not see your state in the drop down menu when placing your order, that means we have currently stopped shipping to your state pending review of your state's regulation.
We can not accept orders to be shipped into Utah per Utah Code §59-14-509.
We have a 45 day return policy.
You may not return consumable items. This includes, but is not limited to: liquid products, coils/pods, cartridges, and batteries. Any item deemed consumable is non refundable.
Please refer to our Refund Policy page for more detailed information.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
CBD DISCLAIMER: VaporDNA™ shall not be held liable for the medical claims made by customer testimonials. The statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products and the testimonials made have not been confirmed by FDA- approved research. These products are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from health care practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.
All CBD and Hemp products are consumables and no returns will be accepted. Shipping to addresses in the U.S.A. only.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.